433.92 MHz remote control for gates, 3-pack garage door remotes compatible with MOTORLINE Falk MX4SP MXS4SP MX5SP RCM DSM, 4 channels
You may also like
Compare with similar items
Product information
Description
Technical Data:
- Color: Black
- Frequency: 433.92 MHz
- Channel: 4
- Application: Electric remote control for telescopic gates, barriers, alarm systems, etc.
- Programming: Programming via the receiver
- Battery: 1 AA alkaline battery required (included)
- Code: Rolling Code
Programming:
To open a door or gate with the transmitter, simply press one of the programmed channel buttons for two seconds.
Each button press triggers an opening, stopping, or closing operation.SAVE TRANSMITTER CODE:
Make sure the battery is correctly inserted in the transmitter.
1. Press and hold the blue door code button on the door opener or SW1 or SW2 on the receiver board.
2. Press and hold the button on the transmitter you want to use to control the door for two seconds. 3. Release the button and wait two seconds. Press the same button again for two seconds. 4. Release the door code or SW button. 5. Press the transmitter button to check the function of the door/gate, etc. Note: To delete a transmitter code from the device, repeat steps 1 through 5. DELETING ALL STORED TRANSMITTER CODES 1. Turn off the gate opener. 2. Press and hold the door code or SW 1 button. 3. Turn the gate opener back on while continuing to hold the button. The coding LED will light up, indicating that the receiver's memory has been cleared. 4. Release the button. All stored codes, including those for the interior lighting, should be erased. Verify this by pressing the buttons previously used to operate the device; they should not respond. This is not a problem in practice.
Features
- BrandCATHERINE
- ColourBlack
- Pcs per pack3
- Voltage220 V
- NF certificationNF138
'/%3E%3C/svg%3E){kind=small}