433MHz Garage Door Remote Key Replacement, 4 Button Cloning, Universal Copy Clone

Features:1.4-channel wireless remote control duplicator, designed with 4 buttons.Transmission distance of 98.4 to 328.1 feet, low interference.Advanced IC programming procedures prevent accidental code deletion.Clones up to 2 remote control signals from 2 remotes.433 MHz fixed frequency remote cloner to copy 99.99% of commonly used learning and fixed-code remotes.Suitable for cars, roofs, garages, gates, doors, alarm systems, heating systems, home automation, etc.5. Made of high-quality ABS and metal, sturdy, wear-resistant, and durable.Lightweight and portable, easy to store and carry.
Specifications:Item Type: Garage Door Remote Control
Material: Metal + ABS
Battery Type: Button Cell (Included)
Battery Capacity: 120 mAh
Battery Model: CR2025
Color: Black
Operating Voltage: DC6V
Rated Current: 0.5 mA
Operating Frequency: 433 MHz
Buttons: 4 Buttons (A B C D)
Code Pairing Format: Face-to-Face (One-to-One)
Modulation System: AsK (AM)
Transmission Power: +13 dBm
Wind Frequency: ±0.2 MHz
Transmission Distance: Approx. 30 m-100 m/98.4-328.1 ft
Instruction:
1. The chip can be copied
2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262 series, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, 527 (all manufacturers); HCS101, HCS200/HCS201 (part number), HCS300/HCS301, MCU part number...
2.How to clear the code:
Simultaneously press the unlock button and the lock button (in some cases, the two buttons are located underneath). Once the LED indicator flashes three times, release either button while holding down the other button, then press the unlock button three times.Enter the rapid flashing mode.At this point, all data in memory is erased; no matter how many buttons you press, the cleaning remote control's LED indicator will not be illuminated.
3.Copying Method
Hold the original remote in one hand and the copy remote in the other.The two remotes should be as close as possible (ideally, place both remotes on a desk at a distance of 0), and press the copy button on each remote when the LED indicator lights up.When it flashes rapidly after three flashes, the copy is successful, and the other key operations are the same.Some remotes have low transmission power, so the original remote must be placed on top of the copy remote for it to work.To avoid noise, avoid interference during operation.If the copy is unsuccessful, try again after clearing the code.

Package List:1 x Garage Door Remote