434.42 MHz remote control for garage doors, 1 piece, compatible with remote controls 4013 TX02-434-4-XP, 4014 TX03-434-2, 4022 TX03-434-2, 4 channels
You may also like
Compare with similar items
Product information
Description
Compatible Models – Compatible Remote Controls: 4014 TX03-434-2 | 4022 TX03-434-2 | 4013 TX02-434-4-XP (NOTE: 868 MHz or other frequencies are not supported)
Long Range – The garage door remote automatically detects the signal; the normal range is 10 to 30 meters.
Portable Design – The garage door remote is retractable, dustproof and waterproof, compact and space-saving.
Customer Service – If you have any questions, please contact us. We will respond within 24 hours. 4013 TX02-434-4-XP (NOTE: 868 MHz or other frequencies are not supported); Long Range – The garage door remote automatically detects the signal; The normal range is 10 to 30 meters; Portable design – The garage door remote control is retractable, dustproof and waterproof, very compact and space-saving. Customer service – Please contact us with any questions. We will reply within 24 hours. ;;;
Technical Specifications
- IC Decoder: Rolling Code
- Frequency: 434.42 MHz
- Battery: Included
- Transmission Range: 10–50 m outdoors
Compatible Models:
TX03-434-2-XP
TX03-434-4-XP
4013 TX02-434-4
OPEN 4014 TX02-434-2
OPEN 4013 TX02-434-4
OPEN 4013 TX03-434-4
OPEN 4022 TX02-434-2
Our garage door remotes only work with Summer green LEDs with SOMloq1 coding.
Important note: Not compatible with SOMER 868 MHz.
Programming:
The remote control has the same functions as the original remote control. You must program it with the original receiver according to the original instructions after receiving it.
1. Locate the learn/code button on the motor. It is usually located under the lamp cover or on the back of the motor.
2. Press the learn/code button once and release it. An indicator light should illuminate.
3. Press the desired transmitter button once. The indicator light will go out.
4. Press the manual transmitter button again. The indicator light will flash and then go out. This indicates that the manual transmitter has been coded.
5. Test the remote control's function.
Features
- BrandCATHERINE
- MaterialPlastic
- ColourBlack
- Number of channels4
- Pcs per pack1
'/%3E%3C/svg%3E){kind=small}