45cm x 200 cm Window Film, Static Decorative Film for Glazing, Patterned Sticker for Window

your home with the Frosted Private Window Film with Bamboo Pattern – Semi-private life protection blurs unwanted views, static adhesion to the surface without glue for added security and convenience, simple peel and stick installation, easy to remove and reapply repeatedly.

Why choose:

Beautiful Patterns: Enhance your decor with bamboo patterns

Easy Use: Hassle-free application with soapy water, easy removal without leaving any mess or residue

Glue Free: Use only soapy water for installation, no toxic glue required

Reusable: Premium PVC material provides added durability, can be repositioned and reused repeatedly

UV Protection: Say goodbye to 96% of UV rays that could damage the skin

Energy Saving: hot spots in summer and maintaining heat in winter

Package Included: 1 x roll of Private window film (45x 200 cm)

Installation Instructions:

Clean the glass, the surface to be laid must be free of dust, grease or any other contaminant

Measure the size of the surface well and cut the film, 1-2 cm more in width and length.

Find the protective film on the back and slowly remove it

Spray the glass safely with soapy water to be able to fix the film by sticking it (More water, better result).

Use a spatula or cloth to let out water and bubbles

Cut off excess film with a knife

Wipe the glass and window frame with a dry towel

Totally Reusable, Fantastic Ecological Choice

Removable leaves no residue on the glass, can reposition and reuse it after years, ideal for rental locations!

Enjoy More Comfortable Light

This privacy film can diffuse direct sunlight to prevent glare, allowing you to work and study under a soft sun

Decorate Where You Want

Ideal for use in your living room, kitchen, office, etc. Stick it on your sliding doors, kitchen cabinets, mirrors and many more!

Read more

Friendly Reminder: The bamboo stalks may be a little visible through.

Some useful tips for you:

If you apply the film in cold weather: soften the film with a hair dryer (heat resistant up to 80 ° C)

Applied to SMOOTH, FLAT and well CLEANED surfaces

To quickly remove the supporting film, stick two pieces of adhesive tape on the right and back side of the film in a corner, then remove the adhesive tapes and the supporting film is removed