1/5
46 Pieces 6mm Pneumatic Quick Connect Air Hose Connector, with 10 Straight Fittings, 10 Angle Fittings, 10 Y-fittings, 10 T-fittings and 6 Reducers Each (2 pieces of each: 4-6, 4-8 and 6-8)
Sold by HYPERDROP
You may also like
Compare with similar items
Product information
Description
🔹Remarkable - ①The hose must be fully inserted into the fitting. ②Do not overtighten during installation to avoid damaging the threads or seals. ③Regularly check the threaded fitting for leaks to ensure there are no gas leaks. ④ When removing the gas hose, ensure there is no pressure in the hose.
🔹Emballag Kit - 10 x 6 mm straight fittings, 10 x 6 mm elbow fittings, 10 x 6 mm Y-fittings, 10 x 6 mm T-fittings, 2 x 4-6 mm reducer fittings, 2 x 4-8 mm reducer fittings, and 2 x 6-8 mm reducer fittings (total: 46 pieces). Packaged in a clear plastic box. Reducing fittings are used where it is necessary to adjust the flow rate or pressure. 🔹Bonné Étachité - The 304 stainless steel locking ring with strong clamping force prevents accidental loosening and is durable. The inner seal is made of nitrile rubber, which effectively prevents gas leaks. It is also equipped with a roll of raw material tape to further improve the sealing and security of the connection.
🔹 𝗧𝘂𝘆𝗮𝘂𝘁𝗲𝗿𝗶𝗲 𝗙𝗹𝗲𝘅𝗶𝗯𝗹𝗲 - the connection can be rotated 360° to easily adjust the angle, so that the bends do not obstruct ventilation or air outlet and all piping requirements are met. It also reduces stress concentration in the piping system and extends its lifespan.
🔹Four Deburriere - internal material made of high-quality H58 brass, high hardness, strong pressure resistance, high temperature resistance, nickel-plated surface treatment, burr-free, anti-corrosion, rust and oxidation resistant, more durable.-
🔹Emballag Kit - 10 x 6 mm straight fittings, 10 x 6 mm elbow fittings, 10 x 6 mm Y-fittings, 10 x 6 mm T-fittings, 2 x 4-6 mm reducer fittings, 2 x 4-8 mm reducer fittings, and 2 x 6-8 mm reducer fittings (total: 46 pieces). Packaged in a clear plastic box. Reducing fittings are used where it is necessary to adjust the flow rate or pressure. 🔹Bonné Étachité - The 304 stainless steel locking ring with strong clamping force prevents accidental loosening and is durable. The inner seal is made of nitrile rubber, which effectively prevents gas leaks. It is also equipped with a roll of raw material tape to further improve the sealing and security of the connection.
🔹 𝗧𝘂𝘆𝗮𝘂𝘁𝗲𝗿𝗶𝗲 𝗙𝗹𝗲𝘅𝗶𝗯𝗹𝗲 - the connection can be rotated 360° to easily adjust the angle, so that the bends do not obstruct ventilation or air outlet and all piping requirements are met. It also reduces stress concentration in the piping system and extends its lifespan.
🔹Four Deburriere - internal material made of high-quality H58 brass, high hardness, strong pressure resistance, high temperature resistance, nickel-plated surface treatment, burr-free, anti-corrosion, rust and oxidation resistant, more durable.-
Features
- BrandREDROAD
- Connection configurationM-M
- Outer diameter6 mm
- Type of connectionTo crimp
- WaterproofYes
Advice from
Air tools and accessories buying guide
Air compressors are no good without the accessories needed to run them. Tools and components like tyre inflators, air spray guns, air fittings and air hoses should be chosen to match your air compressor in terms of pressure rating and flow rate. Got a few small jobs to tackle? An air compressor kit will get you far!
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}