48-Piece Black Pneumatic Random Orbital Sander for Car Polishing and Waxing - AT-1500 Sanding Machine with European Nozzle

Welcome to our shop! Discover our pneumatic random orbital sander, the perfect tool for all your finishing projects! This AT-1500 model, made of stainless steel, is designed for sanding, polishing, deburring, rust removal, and detailing in tight corners and on small metal surfaces. Its eccentric design with a 3mm imbalance gives it exceptional power, capable of handling coarse sanding. You have complete control over your work thanks to the airflow speed control, ideal for sanding, polishing, or waxing. It comes with a complete set of accessories for immediate use, perfect for DIY enthusiasts. You will receive:

- 1 x Sander

- 3 x Hook and loop polishing discs (1, 2 and 3 inches / ~2.5cm, 5.1cm, 7.6cm)

- 9 x Flat foam pads (3 of each size)

- 9 x Wavy foam pads (3 of each size)

- 3 x Microfiber pads (1 of each size)

- 6 x Synthetic wool pads (2 of each size)

- 15 x Hook and loop sanding sheets (5 of each size)

- 1 x Positioning pin (for changing discs)

- 1 x 1/4" air inlet fitting

Technical specifications:

- No-load speed: 15000 RPM

- Air Consumption: 12 CFM

- Air Inlet Diameter: 1/4 inch

- Connection Thread: 1/4-19 NPT

- Exhaust: Rear

- Noise Level: < 83 dB

- Recommended Air Hose Inner Diameter: ~6.3 mm

- Air Nozzle Style Options: American, European, or Japanese.

For optimal and long-lasting performance of your pneumatic random orbital sander, always use an oil-water separator and drain it regularly. Before each use, add 3 to 5 drops of pneumatic oil to the air inlet and run the machine dry. Ensure the air supply is clean to prevent damage.

To change the disc, simply insert the locking pin into the designated hole and rotate the used pad.