5-Digit LCD Digital Counter, Magnetic Induction Punch, High Precision Pro Counter

【LCD Display】: The digital meter uses a large five-digit LCD display with ultra-low power consumption. The screen is large and clear even with prolonged use.【Easy to use】: Press the count/pause (pause) button to stop counting. After 0-30 seconds, the LCD screen will automatically turn off and enter sleep mode. Press the count/pause button again to turn on the indicator light and continue counting.【Digital Counter】: The magnetic induction counter adopts the magnetic induction principle and is easy to install.The maximum counting speed of the counter is: 20 times per second, and the counting is accurate.【Shockproof】: The digital counter adopts shockproof technology to ensure stable system operation, reliable operation and long service life.【Battery powered】: The digital counter uses ordinary AA batteries, no external power required, no mechanical wear, safe operation and long service life.Specifications:Power supply: 1.5V-AA battery (not included)Available ambient temperature: -5-40°CDistance within magnetic induction: about 5-10mmHole size: about 63*35mm/2.5*1.4inApplication method:1.Start counting: Connect the magnetically controlled induction switch to the counting terminal, according to the requirements of actual operation, flexibly assemble the magnetic induction switch and magnet to the appropriate positions of the device, then count once, meanwhile make the magnet. Approach and leave the magnetically controlled induction switch once.2. Pause counting: Press the Count/Pause button to pause counting.According to the working states of the meter, the LCD indication of the meter will turn off within 0-30 seconds and enter sleep state (power consumption almost closes to 0); Press the Pause key again to turn on the LCD indicator and continue counting.3.Reset: Press the Reset button directly; Note: When resetting, whether the meter is in boot state or standby state (LCD display has no indication), the data will be cleared and LCD indication is 00000.4. Only count signal and reset signal can be input with contact signal, other power signals are not allowed.5.The working temperature of the magnet should be below 70 degrees, too high temperature will cause loss of magnetism, thereby invalidating induction.Package List:1*Digital meter1*proximity switch1*mounting bracket1*magnet