5-in-1 smart lock, biometric door button unlocking, keyless entry with BT keypad, Tuya app, remote control, password, fingerprint door lock

Features:

5 Ways to Unlock: The biometric door lock allows for hassle-free entry with our 5-in-1 unlocking method, including the Tuya app, fingerprint, code, key, and IC card access for added convenience and security. With the FPC sensor, it only takes 0.5 seconds for quick fingerprint recognition, and with a valid 6- to 10-digit password and support for front and back virtual passwords. Tuya App Mode: The Tuya Smart app (compatible with iOS) for the smart door handle can be downloaded from the App Store, and the Android version can be downloaded from the app store compatible with Play, Aptoide, etc. Open Bluetooth on your smartphone and tap "Add Device," select the lock, select "Start BT Distribution Network," and then connect it. It can verify the registration via cloud recording. USB Rechargeable: The fingerprint door handle is powered by 4 AAA batteries (not included). When the voltage drops below 4.8V, a voice alarm sounds each time the lock is opened (it is designed to open the door approximately 100 times). There is a backup USB power port, which can be used to open the door by charging it with a power bank device via the USB interface when there is no power at all. Multiple functions: The fingerprint door button features a trial-and-error locking function. After 5 consecutive failed password attempts or 30 failed fingerprint attempts, the system locks for 90 seconds and emits an alarm sound. It supports a mobile app for generating remote passwords that customers can enter to unlock the door. It also supports apartment management via the mobile app. Easy installation: First, install 4 AAA batteries (not included) correctly in the smart lock and insert the front handle into the lock body. Second, disassemble the back handle into 2 parts. Install part A, aligning it with the square bar, and install part B. Then, securely tighten the connecting screws. Finally, insert and rotate the key 180 degrees into the keyhole after completing the installation, then rotate the front handle to test it.

Specifications:

Product Material: Aluminum Alloy

Product Size:

Front Handle: 6.8 x 5.5 cm / 2.67 x 2.16 inches

Back Handle: 64 mm / 2.51 inches

Surface Process: Anodizing

Fingerprint Collection Window: Semiconductor Biological Activity Recognition, Recognition Time Less Than 0.5 Seconds

Fingerprint Storage Capacity: 100 Fingerprints

Password Storage Capacity: 50 sets (valid password length 6-10 bits, supporting up to 16 virtual passwords)

IC card storage capacity: 30 cards

Mobile application: Tuya Smart (BT)

Unlock method: fingerprint, password, IC card, BT, key, remote temporary password

Fingerprint collection resolution: 500 DPI

Rejection rate: (FRR)<0.1%

False recognition rate: (FRA)<0.001%

Power supply: 4 AAA alkaline batteries (not included)

Backup power: 5V USB plug

Battery life: 10 months (lock/unlock 10 times per day) or 3000 continuous unlocks

Low voltage alarm: when the battery voltage is below 4.8V (it can be used approximately 100 times), it will require a low voltage each time the door is opened.

Operating environment temperature: -25 - 65 ℃

Operating environment humidity: 20% RH-90% RH

Suitable door thickness: Standard 35mm-65mm / 1.37 - 2.55 inches, other sizes require custom accessories

Lock body: 6070 bolt

Scrambling code: 15 digits total

Operating voltage: 4.8-6.2V

Product color: Black, Silver Black (optional)

Description:

Add a fingerprint/temporary access code: Click on "Member Management", select Member, then click Tap "Add." Place your finger on the recognition area 5 times, following the voice prompts. Note: Each time you place your finger, fine-tune its position to ensure the entire fingerprint is registered. Select "Temporary Code" and choose from 4 passcode types: "Time-Limited," "One-Time Only," "Dynamic," and "Custom." Pass-Through Mode: Turn off "Auto-Lock" and unlock the lock once to activate Pass-Through Mode. Turn on "Auto-Lock" and unlock the lock once to deactivate Pass-Through Mode. Note: Once Pass-Through Mode is activated, anyone can unlock the lock without authorization. Reset the Lock with the App: Tap "Remove Device," then tap "Confirm" to remove and reset the lock from the app. Note: If the lock is offline, you must swipe your finger across the main interface to bring the lock online. Resetting the lock using the reset hole: 1. Lower the front handle, then remove it and connect the lock via the USB interface. 2. Lightly press the RET reset hole for 4 seconds with a small object (like a ballpoint pen). You will hear a beep every second. Release it when the beeping stops. The system will automatically restore factory settings within 5 seconds, and a voice message will indicate that the factory settings have been successfully restored. Package Contents: 1 x Front Handle, 1 x Rear Handle, 1 x Lock Body, 7 x Screws, 2 x IC Cards, 2 x Mechanical Keys, 1 x Tool Set, 1 x Packaging Box, 1 x Manual src="https://cdn.manomano.com/external-resources/AAHKMJXYDAFdJAOAIMEbOAchP20eJc-eDZu6tX4DM3vheOCVQG1CwTaajx9QNXT0zjlA7B7dEQ mZDHrtkY7yDnEWN-EMVbqBFscPZl06Qn1SWZo0sICu6njEo9ETWCwLOSaeX11JZCzc63gIfQusPLF1stN1yRjdqHA6YJ9c6hrGxKp4zVt6acEwZ9MDCg_A8ms=" alt="Image" data-orig-src="https://yibaistore.yibainetwork.com/end/upload3/image/assistant_no_logo/H47205B/20240910200227-295684-H47205B-5.jpg">