5 m Bluetooth Laser Distance Meter for Indoor Measurement Red

5 m tape measure with 100 m laser distance meter, targeting cross, Bluetooth and dual-axis electronic angle measurement
This 4-in-1 multifunction laser measure combines several measuring tools in one compact device: a 5-metre tape measure, a laser distance meter up to 100 metres, a targeting cross alignment, a Bluetooth connection for surveying and drawing, as well as a dual-axis electronic angle measurement. It is suitable for building professionals, renovation work, interior fitting, installers, tradespeople, as well as private users needing precise measurements for home, furniture or decoration work.

Its format brings together the most common uses of the electronic tape measure and the laser distance meter for taking measurements, checking alignment, verifying angles and surveying dimensions on site or indoors. This type of tool is particularly suited to measuring rooms, walls, openings, floors, ceilings, furniture, structures and hard-to-reach areas where manual measurement alone may be less practical.

Product dimensions: 13,5 × 12 × 7 cm
Indicative volume: 1134,375 cm³
Weight: 375 g

Technical specifications

• Product type: multifunction laser tape measure
• Measuring tape: 5 m
• Laser range: up to 100 m
• Integrated functions: tape measurement, laser measurement, targeting cross, Bluetooth, dual-axis electronic angle
• Usage category: measurement, dimension surveying, renovation, DIY, building site, fitting
• Format: portable handheld device
• Stated accuracy: high accuracy according to the product designation

Compatibility and accessories

This laser distance meter with 5 m tape is designed for routine measuring operations indoors and in many working contexts. The Bluetooth function allows use focused on digital surveying and drawing, convenient for integrating measurements into a planning or dimension-taking workflow. As no additional confirmed accessory is stated in the information provided, only the elements explicitly mentioned can be retained: measuring device, laser function, marking cross, Bluetooth connectivity and dual-axis electronic inclinometer.

Installation

1. Check the general condition of the device before first use.
2. Extend the 5 m tape for close-range or standard linear measurements.
3. Use the laser function for longer-distance measurements, particularly in rooms, corridors or open areas.
4. Activate the targeting cross to make it easier to identify the measurement point.
5. Connect the device via Bluetooth when digital surveying or assisted drawing is required.
6. Use the dual-axis angle measurement to check tilt, relative level or surface orientation as needed.

Use

The electronic tape measure is suitable for different scenarios: measuring a room before laying flooring, checking length for cutting materials, surveying ceiling height, checking alignment for furniture or a frame, checking an angle on a structure or support, and preparing plans for fitting-out work. The combination of the 5 m tape and the 100 m laser offers a practical solution for switching between short direct measurements and remote measurements.

• For small dimensions and nearby objects, the tape remains suitable for direct measurements.
• For long distances, laser measurement allows quicker surveying without fully extending the tape.
• The targeting cross makes visual aiming easier during measurement.
• The dual electronic axis helps with checking angles and inclinations.
• The Bluetooth function can simplify data transcription during drawing or fitting projects.

Other information

This laser measuring device is intended for users looking for a versatile tool bringing together several functions in a single housing. Its weight of around 375 g and compact format make it easier to carry in a toolbox, workshop, service vehicle or building site environment. To preserve measurement quality, it is recommended to handle the device with care, store it in a dry place and use it on surfaces and in conditions compatible with laser reading.

Product suited to indoor measurement, dimension surveying, angle checking, renovation work, DIY, fitting and home improvement needs. This description is limited to the characteristics explicitly identified: 5 m tape, 100 m laser, targeting cross, Bluetooth for drawing and dual-axis electronic angle.