50 Pack Hot Glue Sticks, 270 x 11mm, Extra Strong Car Adhesive, Hot Melt Adhesive for Hot Glue Guns, Dent Repair on Cars, Fabric and Plastic – Black
You may also like
Compare with similar items
Product information
Description
★PDR Glue Sticks – Professional paintless dent repair tools that won't damage the original paint and make your job easier.
Instructions for use:
1. Clean the dents with a clean, damp cloth. 2. Insert the glue stick into the hot glue gun, press the trigger to advance the stick, turn on the gun, and let it heat up for 5 minutes. 3. Use a suitable sealant. Larger dents require a wider sealant. (Note: The larger the sealant, the greater the pullout force.) 4. Press the trigger and apply the extruded glue to the oozing sealant (the 4 holes in the sealant must be covered with hot glue). 5. Quickly place the hot glue tab in the center of the dent and press lightly until the glue hardens and adheres (let the glue cool for about 8 minutes. Cooling time should be less than 10 minutes, and slightly shorter in winter). 6. Align the repair patch with the hot glued area and pull back the tab to pop out the dent. 7. Check the circuit board. If the dent is still present, tap it gently with a flat hammer or pen. 8. Clean the repaired area with a clean, damp cloth. ☛Application and care: Remove water, dust, and other contaminants from the item before use. Wait 24 hours for the adhesive to harden and do not immediately shake the glued parts. Avoid skin contact with the hot glued area to avoid burns. In case of contact with skin, rinse immediately with cold water and seek medical attention immediately. (Do not remove hot particles from the skin during this time.) Features: Dimensions: 270 x 11 mm. Contents: 50 PDR adhesive strips
Features
- BrandSNQ
- Pcs per pack50
- ColourBlack
- Diameter11 mm
- Length27 cm
Sealant gun buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}