500 Pcs Electrical Solder Terminals Heat Shrink Tubing, Heat Shrinkable Butt-to-Butt Seal Insulated Waterproof Electrical Connectors for Marine, Automotive, and Copper

Product description: Function: Temperature specification Minimum melting temperature: 138°C Minimum compression temperature: 80°C Working temperature: -55℃-125℃ Compression temperature > 160°C Material: PE, welded Product Name: Hot welding possible Maximum Voltage: 600V Polyene material Recovery Ratio: 2:1 Dielectric Strength: 1kW Protection Rating: IP67 Includes: 200 x Red Shrink Connectors 180 x Blue Shrink Connectors 80 x White Shrink Connectors 40 x Shrink Connectors yellow Features: Designed with a polyacrylic outer tube and a thermal adhesive inner tube, it creates a durable, watertight seal between wires and connectors. ●Watend connectors will prevent corrosion even in the most humid environments. Features: ● The transparent sleeve of the butt connector allows for visual inspection. --- You can control the working temperature and heating time. ●Easy identification: different colors for different connector sizes ● Can be perfectly used in marine and automotive applications. Features: ●Sealed connectors allow you to use them in hard-to-reach environments or confined spaces. Since no setup is required, you simply place the bare wire into the solder sleeve and apply heat to complete the connection. Simple connection, insulation, and sealing in a single step of the wire. Features:

● Insulation protection: used to seal threaded connections, prevent electrical leakage and prevent feeding rodents from interfering with circuits

●When the welding ring is heated, the bottom and flow into the wire connection, effectively preventing the connection from breaking.

how to use:

1. Let's jump the wire through the connector tube to the correct size end, get the connection and handling of the wire correct and move the connector so that the solder ring part is aligned with the wire connection ;

2. Use a heat gun to cap the ends of the tube so they shrink. The waterproof ring when heated turns into a waterproof ring;

how to use:

3. Heat the solder ring with a heat gun until the ring forms and penetrates the wire connection;

WARNING: Heat the section of the heating element until it is close to the constriction around the wire; overheating will melt the heating element completely. The solder ring must be thoroughly heated to access the wire connection. Package Included: Set of Solder Rings * 1 Key Points: 1. The product size is measured manually; there may be errors. 2. Since different monitors display colors differently, please refer to the actual color you received. 3. Please confirm the size before purchasing.