500 Pcs Electrical Solder Terminals Heat Shrink Tubing, Heat Shrinkable Butt-to-Butt Seal Insulated Waterproof Electrical Connectors Marine Automotive Copper TREETALK

General Description

Solder electrical lugs with heat-shrink tubing are designed to ensure leak-proof and durable electrical connections.Made of polyethylene, these lugs are ideal for use in marine and automotive environments, offering corrosion protection even in humid conditions.Thanks to their design, they allow for easy visual inspection and simple connection without prior configuration.

Technical Specifications

• Minimum melting temperature: 138°C
• Minimum compression temperature: 80°C
• Operating temperature: -55°C to 125°C
• Compression temperature: > 160°C
• Maximum Voltage: 600V
• Dielectric Strength: 1kV
• Protection Rating: IP67
• Material: PE, welded
• Recovery Ratio: 2:1

Compatibility and Accessories

• 200 x Red Shrink Connectors
• 180 x Blue Shrink Connectors
• 80 x White Shrink Connectors
• 40 x Yellow Shrink Connectors

Installation

1. Insert the wire through the connector tube to the correct length, then align the connector with the wire connection.
2. Use a heat gun to heat the ends of the tubing so they shrink.
3.Heat the solder ring until it forms and enters the wire connection.Be careful not to overheat to avoid melting the conduit.

Use

These lugs provide insulation and a one-step seal.They are designed to seal threaded connections, prevent electrical leakage, and keep rodents out of circuits.When heated, the adhesive inside the connector creates a durable, watertight seal.Other Information

• WARNING: Heat the section of the heating conduit until it is close to the constriction around the wire;
• Excessive heat can damage the duct.
• The product size is measured manually; errors may occur.
• Colors may vary depending on the monitor; please refer to the actual color received.