500 Pcs Solderable Electrical Terminals with Heat Shrink Tubing, Heat Shrinkable Butt-to-Butt Seal Insulated Waterproof Electrical Connectors for Marine, Automotive, and Copper Applications

General Description

Solder electrical lugs with heat-shrink tubing are designed to ensure leak-proof and durable electrical connections. Made of polyethylene, they are ideal for use in marine and automotive environments, offering corrosion protection even in the wettest conditions. Their design allows for easy visual inspection and simple connection without prior configuration.

Technical Specifications

• Minimum Melting Temperature: 138°C
• Minimum Compression Temperature: 80°C
• Operating Temperature: -55°C to 125°C
• Compression Temperature: > 160°C
• Maximum Voltage: 600V
• Material: PE (polyethylene)
• Recovery Ratio: 2:1
• Dielectric Strength: 1 kV
• Protection Rating: IP67
• Quantity Included: 200 red connectors, 180 blue connectors, 80 white connectors, 40 yellow connectors

Installation

1. Insert the bare wire into the connector tube until it reaches the appropriate end.
2. Use a heat gun to heat the ends of the tube so they shrink.
3. Heat the solder ring until it forms and enters the wire connection. Be careful not to overheat, as this could completely melt the heating duct.

Use

Sealed connectors allow for use in hard-to-reach environments or confined spaces. They provide insulation and a one-step seal, preventing electrical leakage and rodent interference with the circuits.

Other Information

• WARNING: Heat the section of the heating duct until it is close to the constriction around the wire.
• Product size is measured manually; errors may occur.
• Colors may vary depending on the monitor; please refer to the actual color received.