500 Solderable Electrical Terminals with Heat Shrink Tubing for Reliable Connections

General Description

This shrink-fit connector kit is designed to ensure secure and durable electrical connections, even in harsh environments. Thanks to their polyethylene construction and thermal adhesive, these connectors create a watertight seal between the wires and the connectors, preventing corrosion and electrical leakage.

Technical Specifications Minimum Melting Point: 138°C Minimum Compression Point: 80°C Working Temperature: -55°C to 125°C Maximum Voltage: 600V Protection Rating: IP67 Dielectric Strength: 1kV Recovery: 2:1 Compatibility and Accessories 200 Red Shrink-Fill Connectors 180 Blue Shrink-Fill Connectors 80 White Shrink-Fill Connectors 40 Yellow Shrink-Fill Connectors Installation

1. Insert the wire into the connector tube to the correct length. Align the sleeve with the wire connection.

2. Use a heat gun to heat the ends of the tube until they shrink and create a watertight seal.

3. Heat the solder ring until it penetrates the wire connection to ensure complete insulation.

WARNING: Do not overheat the heat-shrink sleeve to avoid melting it completely.

Applications

These connectors are ideal for marine and automotive applications, providing a simple solution for secure connections in confined spaces. Their sealed design allows for use in humid environments while ensuring effective insulation against rodents and electrical leakage.

Other Information

Please check the size and color of the connectors before purchasing, as errors may occur during manual measurement and colors may vary depending on the monitor.