500Pcs Electrical Solder Terminals Heat Shrink Tubing, Heat Shrink Butt Solder Seal Waterproof Insulated Electrical Connectors Marine Automotive Copper TREETALK

Product description: Function: Temperature specification Minimum melting temperature: 138°C Minimum compression temperature: 80°C Working temperature: -55℃-125℃ Compression temperature > 160°C Material: PE, welded Product name: hot welding can be carried out Maximum voltage: 600V polyene material Recovery: 2:01Dielectric strength: 1kwProtection level: IP67include:200 x red shrink connectors180 x blue shrink connectors80 x white shrink connectors40 x yellow shrink connectorsFeatures:Designed on the outside of polyacrylic tube and inside with thermal adhesive, it creates a durable waterproof seal between the wires and connectors.●Watend connectors will prevent the corrosion even in the most humid environment.feature:● Transparent butt connector sleeve allows visual inspection.--- You can control the working temperature and heating time.●Easy identification: different colors for different sizes of connectors●Can be used perfectly in marine and automotive applications.feature:●Sealed connectors allow you to use them in hard-to-reach environments or limited spaces. Since no setup is required, you simply place the bare wire into the solder sleeve and apply heat to complete the connection. Simple connection, one-step insulation and sealing of the wire.feature:●Insulation protection: used to seal threaded connections, prevent electrical leakage, and prevent feeding rodents from interfering with circuits●When the welding ring is heated, the bottom and flow into the wire connection, effectively preventing the connection from breaking.how to use:1.Let's jump the wire through the connector tube to the right size end, get the connection and wire handling correct and move the connector so that the solder ring part is aligned with the wire connection;2. Use a heat gun to cap the ends of the tube so they shrink. The waterproof ring when heated turns into a waterproof ring; how to use:3. Heat the solder ring with a heat gun until the ring forms and penetrates the wire connection; WARNING: Heat the heating conduit section until it is close to the constriction around the wire; too much heating will completely melt the heating duct. The solder ring needs to be heated thoroughly to access the wires connection.Package Included:Solder Ring Set*1Main Points:1.The product size is measured manually, there may be errors2. Since different monitors display different colors, please refer to the actual color you received.3. Please confirm the size before purchasing.