500pcs Solder Sealed Wire Connectors Heat Shrink Sleeves for Self Soldering Electrical Terminals Suitable for Marine Automobiles

Product description:

Function:

Temperature specification

Minimum melting temperature: 138°C

Minimum compression temperature: 80°C

Working temperature: -55℃-125℃

Compression temperature > 160°C

Material: PE, welded

Product name: hot welding can be carried out

Maximum voltage: 600V

polyene material

Recovery: 2:01

Dielectric strength: 1kw

Protection level: IP67

include:

200 x red retractable connectors：Diameter 0.5-1.0 mm² (A.W.G.: 22-18)

180 x blue retractable connectors：Diameter 1.5-2.5 mm² (A.W.G.: 16-14)

80 x white retractable connectors：Diameter 0.25-0.34 mm² (A.W.G.: 26-24)

40 x yellow retractable connectors：Diameter 4.0-6.0 mm² (A.W.G.: 12-10)

340x black heat shrink sleeve

Features:

Designed on the outside of polyacrylic tubing and on the inside with thermal adhesive, it creates a durable waterproof seal between wires and connectors.

●Watend connectors will prevent corrosion even in the most humid environment.

feature:

● The transparent butt connector sleeve allows for visual inspection. --- You can control the working temperature and heating time.

●Easy identification: different colors for different connector sizes

● Can be used perfectly in marine and automotive applications.

feature:

●Sealed connectors allow you to use them in hard-to-reach environments or limited spaces. Since no setup is required, you simply place the bare wire into the solder sleeve and apply heat to complete the connection. Simple connection, one-step insulation and sealing of the wire.

feature:

● Insulation protection: used to seal threaded connections, prevent electrical leakage and prevent rodent feeding from interfering with circuits

●When the welding ring is heated, the bottom and flow into the wire connection, effectively preventing the connection from breaking.

how to use:

1. Let's jump the wire through the connector tube to the right size end, get the connection and handling of the wire correct and move the connector so that the solder ring part lines up with the wire connection;

2. Use a heat gun to cap the ends of the tube so they shrink. The waterproof ring when heated turns into a waterproof ring;

3. Heat the solder ring with a heat gun until the ring forms and penetrates the wire connection;

WARNING: Heat the section of heating conduit until it is close to the constriction around the wire; too much heating will completely melt the heating duct. The solder ring must be heated thoroughly to access the wire connection.

Package included:

Welding ring set * 1

Main points:

1. The product size is measured manually, there may be errors

2. Since different monitors display different colors, please refer to the actual color you received.

3. Please confirm the size before purchasing.