1/4
50mm TRIMEC diamond drill bit for hole saws in glass, ceramic, porcelain, and tile
Of which environmental contribution £0.10 including VAT.
Sold by Sinocor GmbH
Product information
Description
General Description
The 50mm diamond hole saw drill bit is designed for precise drilling of materials such as stone, tile, ceramic, and glass. Thanks to its central positioning tip, it allows for clean, smooth holes without chipping. This drill bit is ideal for DIY projects requiring a high-precision finish.Technical Specifications
- Drilling Diameter: 50 mm
- Shank Size: 10 mm
- Drilling Depth: 40 mm
- Overall Length: 70 mm
- Materials: Diamond, Carbon Steel
- Finish: White Zinc Plated
Use
For efficient drilling, it is recommended to:- Use at a low drilling speed and with low pressure.
- Work with a coolant (water) to prolong the life of the drill bit.
Other Information
- Not suitable for drilling tempered glass, plastic, or wood.
- Not suitable for use on concrete or for depths greater than approximately 1.27 m cm.
- Diamond drill bits with a clearance hole facilitate the entry of cooling water and the removal of chips.
Features
- BrandTEHTUY
- NF certificationNF011
- Warranty1 year(s)
- Certification bodyNF
- OriginMade in Serbia
- Diameter50 mm
- Total length7 cm
- Compatible machineDrill
- Suitable forMineral / stone
- Material to Work OnConcrete
- MaterialDiamond
- Weight100 g
- Pcs per pack1
- Bit typeForest
- Sold as a setNo
- ManoMano ReferenceME98569657
- MMID544835314795
- Product codeZSino-00089
- EAN6240449238181
Advice from
Drill buying guide
From hammer drills to drill drivers, your choice of drill will come down to the type of tasks you want to complete. For example, a cordless drill is better for driving screws while a corded drill is best suited to drilling. Read on for our tips on picking the right torque, RPM, impact rate, battery and chuck type.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}