50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit

50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit
50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit
50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit
50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit
50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit
50w Mono-Crystalline Solar Panel PV Photo-voltaic with charging kit
LOWENERGIE
£54.99
£15 off on your 1st purchaseProfessionals, get Pro prices excl. VAT
Good to know
  • Warranty 1 year
  • Return within 14 days
Product details
Features
  • Weight
    4 kg
  • Power
    50 W
  • Voltage
    1000 V
  • Colour
    Green
  • Fixing method
    Recess
  • Warranty
    1 year
  • Type of electrical installation
    Built-in
  • Type of power connector
    Connection
  • ManoMano Reference
    ME12830656
  • MMID
    631241543714
Description

Mono 50W Solar Panel Kit 1

Solar Kit Contents - 

50w Mono Solar panel

5 Metre Solar Power Extension Cable with MC4 Connectors

10A PWM Solar Charge Controller including USB outlet

Solar Panel Technical Specification -

Maximum Power (Pmax): 50W

Maximum Power Voltage (VMP): 18V

Maximum Power Current (IMP): 2.78A

Open Circuit Voltage (VOC): 22.54V

Short Circuit Current (ISC): 2.97A

Weight: 4 KG

Size: 680*530*25mm

Power Tolerance: +/-3%

Maximum System Voltage: DC1000V

In the event that the solar panel is in shade for a prolonged period, our solar panels either have one or two built-in bypass diodes which will enable the panel to continue generating.

Solar Panel Battery Charge Regulator Controller 12V / 24V Auto Switching
Solar charge controllers are required to regulate the power output from the solar panels to ensure effective charge of a typical 12V or 24V lead acid battery without overload. PWM (Pulse Wave Modulation) solar charge controller provide a cost-effective solar charger for the solar panel outputs in our range. Optimised charge control which helps to prolong the life of the battery. 3-6% more effective than non-PWM charge controllers. LED indicator light to show battery state. Uses industrial grade microcontroller chip to work in a wide range of temperatures and humidity.

Warning: The Connection Order Below must be followed

1, Battery Cable, 2 Load Cable, 3, Solar Panel Cable

Do not install the charge controller in a sealed enclosure where battery gases can accumulate.

These charge controllers can be used with one or more 12V batteries where additional storage capacity may be needed.

Solar Charge Controller - Technical - 

10A max Rated Discharge Current and Rated Charge Current

Suitable for 12V or 24V systems, auto detecting & auto switching

Only suitable for lead acid batteries: Sealed wet lead acid, AGM, GEL

This controller is not suitable for nickel metal hydride, lithium ion or other batteries

Maximum solar input; <50V

Equalisation; Sealed 14.4V, Gel 14.2V

Float Charge; 13.7V (by default, value adjustable)

Load outlet discharge stop 10.7V (by default, value adjustable)

* Discharge Reconnect 12.6V (by default, value adjustable)

USB outlet - 5V/3A maximum

Self-consumption <10ma 0= 12w= at= 12v= li=>

working temperature range -35 to +60 Deg C

Dimensions - 150 x 78 x 35 mm

Weight - 150 grams

* Discharge reconnect meaning. This voltage is user adjustable. As the load consumes the power within the battery, the voltage eventually drops to 10.7V and the load output of the controller will automatically stop any further charge from protect the battery. If for example the next day maybe rainy or cloudy day and the battery charges slowly, if the voltage is still below 12.6V, the load output from the controller will still not work. If the sun comes out in the afternoon, or the next day is much sunnier conditions, once the battery voltage rises above 12.6V, the controller load output will automatically start to work again. Discharge reconnect is set to 12.6V by default, although you may wish to set this perhaps 12.4V. Discharge reconnect is aimed at protecting the battery and reducing the depth of discharge cycling. Lead acid batteries last longer with shallow discharge.

Product features - 

1, built in industrial microcontroller

2, large LCD display, all parameters are adjustable

3, full four-stage PWM charge management

4, built in short circuit protection, open circuit protection, reverse protection, overload protection

5, dual MOSFET reverse current protection, low heat production

Advice from

How to install solar panels

Solar panel roof installation varies based on the accessories used. PV panels on a tile or slate roof can be installed over roofing underlay or a special integrated framework and solar flashing can be made of various materials including zinc, lead or plastic. Read on for the basic steps to installing solar panels.
How to install solar panels
You are here:
  • Millions of products

  • Delivery to your home or click & collect

  • Hundreds of dedicated experts online