6-60V 10A Power Supply Module Switch Board for Battery Charger

Welcome to our shop! Discover our battery charge control module, an essential device for smart and safe battery management. Designed for long-lasting performance and intuitive use, this module is the versatile solution for your renewable energy and electric mobility needs. **Key Features:** - **Thick circuit board** ensuring robustness and longevity. - **Simple installation and safe operation** with adjustable parameters and a settings memory function. - **Compatible with a wide range of batteries**, including storage batteries (lead-acid, AGM, Gel) and lithium batteries (Li-ion, LiFePO4). - **Automatic operation** for charging and discharging, ensuring safe operation without constant monitoring. - **Various applications**: perfect for car alternators, solar installations, wind turbines, and electric vehicle charging. **Product Description:** This control module provides automatic charging and automatic disconnection. It is designed to work with 6V to 60V batteries. It protects your battery against overcharging and deep discharging by intelligently managing charge cycles. **Technical Specifications:** - **Name:** Battery Charge Control Module - **Control Voltage:** 6V - 60V - **Control Current:** ≤ 10A - **Control Accuracy:** 0.1V - **Voltage Deviation:** ±0.1V - **Application:** Various storage batteries and lithium batteries - **Dimensions:** Approximately 7 x 4.8 x 1.7 cm / 2.8 x 1.9 x 0.7 inch - **Weight:** 33g **Operation and Settings:** The module has a digital display and two buttons (On and Off) for easy adjustment. - **Voltage Adjustment:** In normal mode (flashing display), use the buttons to increase or decrease the voltage. - **Set the Starting Voltage (low threshold):** Press and hold the Power button to make the display flash and adjust the value. - **Set the cutoff voltage (high threshold):** Press and hold the Power button to make the display flash and adjust the value. - **Reset:** Press both buttons simultaneously when powering on. The display will show "888" to confirm the reset. **Usage Tips:** - Ensure the start voltage is always lower than the cutoff voltage. - This module is perfectly suited for charging a 48V battery (maximum charging voltage ~60V). Never exceed 60V. - The module is powered by the battery and will not display if the voltage is below 6V. - It only controls the opening/closing of the charging circuit. The charging current depends entirely on your charger. A recommended current is 1/10th to 1.5/10ths of the battery capacity. - This module does not convert voltage. You must use a charger that matches your battery's voltage (e.g., a 12V charger for a 12V battery). **Package Contents:** - 1 x Charge Control Module