6-Blade Heat-Powered Wood Stove Fan, Fireplace Fan, Stove Fan for Fireplace, Pellet Stove, Wood Fireplace and Wood Burning Stove, 87℃ Quiet Start-Up Operation

Energy Saving: The 6-blade heat fan can convert more heat while improving stability. The energy conversion efficiency is very high, saving more energy. Self-Powered: The wood stove fan is designed to circulate the hot air created by a wood/coal or pellet stove operating at normal surface temperatures between 60°C and 350°C. Overheat Protection: When the temperature exceeds 350 degrees Celsius, this chimney fan will gradually insulate the contact surface with the chimney and the fan will stop working to protect the machine's normal operation. Quiet and Noiseless: Newly designed blades provide a larger air volume with a noise level below 35dB. The only moving part is the blade assembly. Say goodbye to terrible noise and enjoy warm air in a quiet and comfortable environment. Easy Operation: There is a hook on the stove fan for easy transport. No installation is required; simply follow the instructions to place your stove fan to the side of the wood stove or fireplace, not directly in front of or near it. This fan uses thermal energy to circulate warm air from the wood-burning stove. A thermoelectric module on the fan acts as a small generator to power the fan motor. Electric current is generated when this generator module experiences a temperature difference between its upper and lower surfaces. The bottom of the fan heats the lower surface of the module, while the top of the module is kept cool by the fan's upper fins. No batteries or power supply are needed! As long as it's placed on the wood stove, it absorbs heat to spin the fan, blowing warm air from above the wood-burning stove directly into the living room, increasing air circulation and improving the stove's heating efficiency. The fan's rotation speed varies depending on the temperature of the wood stove. The higher the stove temperature, the faster the fan's rotation speed. When the oven temperature drops so low that the fire goes out, the rotation speed slows until it stops. Product advantages: 1. Saves fuel; the fans distribute the stove's heat for improved energy efficiency. 2. Self-powered – no plug required, no battery needed. 3. Quiet operation. 4. Automatic start, speed adjustment, and shut-off. 5. Simple and elegant design. Usage: 1. Place the stove fan on a smooth, flat surface on top of the stove, near the side or back of the chimney. 2. The oven fan is designed for freestanding stoves with an oven surface temperature between 65°C and 350°C. Temperatures exceeding this range can damage fans and generators, rendering your fans inefficient. Product Parameters: Product: Chimney Fan Material: Alumina Air Volume: 180-210 L Blades: 6 Blades Wind Speed: 800-1100 rpm Noise: ≤35 dB Working Temperature: 60-350°C Battery: None Size: 180*100*190 mm Color: Black