6-in-1 LCD Digital Multimeter 110-250V 100A with Current Sensor and Power Monitoring

Discover our smart energy monitor, a precision device designed for comprehensive monitoring of your electricity consumption. This P06S-100 model, also known as a 6-in-1 voltage meter, incorporates a specialized chip for optimal stability and reliability in both home and industrial settings. It displays all essential data in full screen: RMS voltage, RMS current, active power, stored electricity, grid frequency, and power factor. Energy readings are displayed in 5 digits, with a measurement range of 0.01 to 99,999 kWh, and are compatible with 50/60 Hz frequencies. The device allows you to measure and monitor electrical power, voltage, current, and much more. It features a convenient backlight, which you can turn on or off with a simple press of the button. To reset the accumulated kWh reading, simply press and hold this same button.

**Technical Specifications:**

* Model: P06S-100 (6-in-1 Voltage Monitor)

* Max. Power / Rated Power: 22000W

* Standby Power: < 1W

* Max. Current / Rated current: 100A

* Input voltage: 110~250V

* Accuracy: Voltage (±1%), Current (±2%), Power (±2%)

* Dimensions: Approx. 90 x 55 x 26 mm

* Current transformer (CT) inner diameter: Approx. 12.68 mm

* Weight: 106g

**Button functions:**

1. Press briefly to turn the backlight on/off.

2. Press and hold for 3 seconds to set the overload power (factory default: 4.4kW). The display will flash; pressing once adds 1, holding for 2 seconds shifts the cursor (max. value: 99.9kW). The device saves and exits mode after 5 seconds of inactivity.

3. Press and hold for 5 seconds to reset the system: the accumulated electricity is cleared and the overload power returns to its default value.

**Important Instructions:**

* The 6 main functions are displayed in full screen. The backlight flashes to indicate an overload power exceedance.

* **Caution:** Models P06S-20 and P06S-100 are different products with distinct internal principles and structures. They cannot be used in the same way! Improper connection, not covered by the warranty, may damage the device.

* **For Model P06S-100:** An external power transformer (supplied) is required for normal operation. The cable must be routed in the direction indicated by the arrow on the transformer. The absence of a power and power factor display indicates incorrect wiring. Please refer to the connection diagram.

**Precautions for use:**

1. The total power of the connected devices must not exceed the rated power (22000W / 100A), otherwise the product may be damaged or a fire may occur.

2. This product is not waterproof. Use it in a dry environment, away from splashes (bathroom, kitchen, aquarium, etc.). Keep out of reach of children and away from heat sources. Do not insert anything other than a wire into the connection terminals and tighten the screws securely.

3. Do not disassemble the device.

**Package Contents:**

* 1 x Voltage Monitor (meter)

* 1 x Current Transformer (mutual inductance)

(Other items shown in the photos are not included.)