[6 pieces] Invisible floating shelf brackets 12 x 120 mm - Wall mounting - Sturdy

Invisible mounting brackets - Ideal for DIY projects or creating custom moldings, these brackets are completely concealed within walls and panels, offering a simple and elegant style that will enhance your interior. Materials - The interior of the floating shelf bracket is made of iron, while its body and expansion anchor are made of plastic. Carefully crafted, it is robust and durable. Dimensions - Total length: 195 mm; expansion anchor length: 75 mm; diameter: 12 mm; support rod length: 120 mm; diameter: 12 mm. High stability - The support rod is a grooved hexagonal cylinder that reinforces the panel attachment and improves stability. High load capacity - The wall shelf bracket is very sturdy. When properly installed on a solid brick wall, it can support approximately 20 kg. [Name]: Heavy-Duty Invisible Wall Brackets for Floating Shelves [Materials]: Metal (Iron) + Plastic [Color]: Brown [Weight]: 58.58 g [Dimensions]: 12 mm x 120 mm [Dimensions]: Total Length: 195 mm; Expansion Tube Length: 75 mm, Diameter: 12 mm; Support Rod Length: 120 mm, Diameter: 12 mm [Contents]: 6 invisible brackets for floating shelves. These brackets allow you to mount all types of wall shelves: bookcases, display shelves, garage shelves, decorative shelves, bathroom shelves, shoe racks, etc. They adapt to all your wall storage projects. Installation Steps: 1. Measure the center-to-center distance and drill a hole in the wall. The hole depth should not exceed 75 mm. 2. Insert the end of the bracket with the black cap into the hole. 3. Insert the support rod into the hole. Once the end of the screw is properly seated in the cap and tightened clockwise, continue turning until the expansion anchor fully expands into the wall to provide complete support. 4. Next, drill a hole of the appropriate diameter through the side of the board (depending on the hole spacing in the wall). 5. Finally, insert the circuit board into the support rods. Notes: 1. You will need a 12 mm drill bit to drill the holes. 2. Remember to place the central silver metal ring on one side of the expansion tube and push it into the wall. 3. Each board must be held horizontally by at least two invisible brackets.