6-Way Fuse Box 12V ATO 32V 100A Fuse Holder with 10 Fuses, 6 LED Indicators, Protective Cover + 2 Stickers for Car Battery

Product Material]: PBT body, PC waterproof and dustproof cover, nickel-copper connection terminals, PPX40 stickers.

Rated Input Voltage: 32V

Rated Input Current]: 100A

Maximum Output Current: 30A per circuit

Indicator Color]: Red

Main Wire Terminal]: M5 threaded studs

Main Wire: #4-6

Single Wire Terminal]: M4 threaded studs

Single Wire Terminal]: #12-16

Indicator: When the red indicator light is on, it means the fuse has blown and must be replaced in time for continued operation.

Product Application]: It can be Install and use on small cars, villas, caravans, buses, yachts, boats, etc.

Product Scope]: Can be directly connected to any electrical equipment in the car/boat [e.g., dome light, car headlight, driving lights, fog lights, signal lights, car refrigerator, car charger, car fan, car television, etc.]

Product Accessories]: Adhesive x2; Self-tapping screws x4; 20A fuse x4; 15A fuse x4; 10A fuse x2; 5A Fuse x2.

Fuse Function: When there is a malfunction or anomaly in the circuit, this is accompanied by an increase in current. This increased current will damage important or valuable equipment in the circuit, and it can also burn out the circuit or even cause a fire. Fuses protect electronic equipment from serious damage caused by overcurrents and internal malfunctions. Therefore, each fuse has a rating and blows if the current exceeds that rating. If a fuse is correctly placed in a circuit, it will blow automatically when the current abnormally reaches the upper limit of height and temperature, thus protecting the circuit's operation.

Product Advantages]: [1] This product is made of flame-retardant PBT, resistant to high and low temperatures, which meets the following requirements: [The fuse holder exhibits good mechanical strength, good insulation, good heat resistance, and good flame retardancy, and must not produce fracture, deformation, combustion, or short-circuit phenomena during use.]

2] All busbars and fuse holders are made of corrosion-resistant nickel copper with excellent electrical conductivity.

[3] All fasteners are made of stainless steel; the inlet and outlet of the fuse box are secured with screws. Tightening for faster installation, and the fuse box is secured with self-tapping screws for easier and more secure installation.

[4] The product is equipped with a red LED indicator, corresponding to each fuse connected to the device. When a fuse is disconnected, the red light illuminates, allowing you to immediately identify which fuse is blown, convenient for timely handling!

[5] Additional sticker: The sticker can be used to identify the connected device according to the name on the label. When a fuse is blown, the red light illuminates, allowing you to quickly identify which device is out of service, saving time and effort!

[6] The product comes with two fuses. When a fuse blows during use, it can be immediately replaced with a spare. The fuses are supplied with various amperages, so you can choose the correct one. Fuse with the correct amperage for your current appliance.

Package contents: You will receive 1 fuse. (Other products are not included.)

The data is measured manually; please allow for a 1-3 cm error. The color may vary depending on the lighting; please refer to the product received. These parts are not original; please note this before purchasing.