6-Way Fuse Box, Fuse Holder with Negative Bus, Blade Fuse Blocks with 16 Fuses, 6 LED Indicators, Protective Cover for 12V/32V Car, Boat, Marine, Truck, SUV

[Product Name]: Independent positive and negative terminals, one input and multiple outputs, fuse box with LED indicator [1 input and 6 outputs]

[Product Model]: CS-1469A1

[Product Net Weight]: 191 g

[Product Gross Weight]: 223 g

[Product Size]: 87.75 x 85 x 36.5 mm

[Packaging Method]: Small, thick, five-layer white box with a waterproof coating.

[Packaging Box Size]: 9.3 x 4.6 x 12.7 cm.

[Product Material]: PBT body, waterproof and dustproof lid made of PC, nickel-plated copper terminal block, PPX40 sticker

[Input Voltage Rated]: 32V

[Input Current Rated]: 100A

[Maximum Output Current]: 30A per circuit

[Indicator Color]: Red

[Main Terminal]: M5 threaded stud

[Main Wire]: #4-6

[Single Line Terminal]: M4 threaded stud

[Single Wire]: #12-16

[Indicator Function]: When the red LED is lit, it means the fuse has blown and must be replaced promptly to continue functioning.

[Product Installation Range]: It can be installed on cars, villas, motorhomes, buses, yachts, boats, etc.

[Product Usage Range]: It can be directly connected to any electrical circuit on the car/boat [such as: dome lights, car headlights, wide-beam lights, fog lights, warning lights, car refrigerators, car chargers, car fans, car televisions, etc.]

[Product Accessories]: 2 stickers; 4 self-tapping screws; 4 x 20A fuses; 4 x 15A fuses; 2 x 10A fuses; 5A fuse x2.

[Fuse Function]: When a circuit malfunctions or is abnormal, the current continues to increase, and this increasing current can damage important or valuable equipment in the circuit, burn out the circuit, or even cause a fire. Fuses protect electronic equipment from overcurrents and can also prevent serious injuries caused by internal faults in electronic equipment. Therefore, each fuse has a current rating, and the fuse blows when the current exceeds that rating. If the fuse is correctly placed in the circuit, it will blow to interrupt the current when it rises abnormally above the upper limit and temperature, thus protecting the circuit's operation.

[Product Advantages]: [1] The product is made of flame-retardant PBT material, resistant to high and low temperatures, which meets the requirements of [the fuse holder has good mechanical strength, insulation, heat resistance, and flame retardancy, and should not break, deform, or be damaged during use. Combustion and short-circuit phenomena] conditions

[2] All busbars and fuse clips are made of nickel-plated copper, with corrosion resistance and excellent electrical conductivity.

[3] All fasteners are made of stainless steel. The inlet and outlet ends of the fuse box are secured with clamping screws, allowing for faster installation, and the fuse box is fixed with self-tapping screws, making installation easier and safer.

[4] The product has a red LED indicator design, which corresponds to each electrical device connected to the fuse.When the fuse is disconnected, the red indicator light illuminates, allowing you to immediately identify which fuse is blown, which is convenient for timely troubleshooting.

[5] The product comes with a sticker that can be attached to the connected electrical device according to the label. When the fuse blows and the red indicator light is on, you can quickly identify which electrical device has a problem, saving time and effort.

[6] The product comes with a double fuse. When used, the fuse blows and can be immediately replaced with the spare fuse. The fuse is supplied with multiple Abe terminals, and the appropriate Abe terminal can be selected based on the current electrical device.