6-Way Fuse Box with Negative Bus, 16 Blade Fuse Slots, 6 LED Indicators and Protective Cover – 12V/24V

[Size]: 87.75*85*36.5 mm

[Rated Input Voltage]: 32 V

[Rated Input Current]: 100 A

[Maximum Output Current]: 30 A per circuit

[Main Line Terminal]: M5 threaded stud

[Main Line Conductor]: #4-6

[Single Wire Terminal]: M4 threaded stud

[Single Wire Conductor]: #12-16

[Indicator Function]: When the red LED is on, it means the fuse has blown and must be replaced promptly to maintain operation.

[Product Installation Range]: Can be installed on cars, villas, RVs, buses, yachts, etc.

[Product Scope of Use]: Can be directly connected to the power line of any electrical device on the car/boat [such as: roof lights, car headlights, side marker lights, fog lights, warning lights, car refrigerators, car chargers, car fans, car TVs, etc.]

[Product Accessories]: Stickers x 2; Self-tapping screws x 4; 20A fuses x 4;

[Fuse Function]: When a fault or malfunction occurs in the circuit, the current will continue to increase. This increased current can damage important or valuable circuit components, burn out the circuit, or even cause a fire. Fuses protect electronic equipment from overcurrents and can also prevent serious damage caused by internal faults in electronic equipment. Therefore, each fuse has a current rating. When the current exceeds the rating, the fuse blows. If the fuse is correctly placed in the circuit, it will blow and cut off the current when the current abnormally reaches the upper limit height and temperature limit, thus protecting the circuit's operation. [Product Advantages]: [1] The product is made of flame-retardant PBT material that is resistant to high and low temperatures, meeting the requirements [The fuse holder has good mechanical strength, good insulation, good heat resistance, and flame retardancy, and should not cause breakage, deformation, burning, or short circuits] conditions. [2] All busbars and fuse clips are made of nickel-plated copper, which is corrosion-resistant and has excellent electrical conductivity. [3] All fasteners are made of stainless steel. The inlet and outlet ends of the fuse box are secured with clamping screws, allowing for faster installation. The fuse box is secured with self-tapping screws, making installation simpler and safer. [4] The product has a red LED indicator, which corresponds to the electrical devices connected to each fuse. When a fuse is disconnected, the red light illuminates. You can immediately identify which fuse is blown, saving time. [5] The product comes with a sticker that can be affixed to the connected electrical device according to the name on the sticker. When a fuse blows and the red light illuminates, you can quickly identify which electrical device has a problem, saving time. [6] The product comes with double fuses. When in use, if a fuse blows, it can be immediately replaced with the spare. Several fuses are included. You can choose the correct fuse for each fuse. Current electrical appliances.

Note: All data is measured manually, please allow 1-3 cm error due to differences in light and display. There may be color differences; please refer to the actual item received.