600W Adjustable Voltage/Current DC-DC Boost Power Supply Module for LEDs

Welcome to our shop! Discover our DC-DC boost power supply module, a high-performance voltage converter designed for a multitude of demanding applications. This module offers precise control and robust reliability for all your projects. **Key Features:** - **Adjustable Output:** Constant voltage and current, both continuously adjustable for perfect control of your power supply. - **Exceptional Efficiency:** Benefit from a conversion efficiency of up to 96%, minimizing energy loss. - **High-Quality Components:** Constructed with high-power electronic components, ensuring optimal stability and reliability. - **Efficient Heat Dissipation:** The printed circuit board (PCB) uses an aluminum substrate offering excellent thermal conductivity for improved cooling. - **Versatile Use:** Ideal for powering LED strips, DIY power supplies, car power supplies (12V/24V to higher voltages), solar charging systems, battery charging (lithium, lead-acid, etc.), and many other applications. **Detailed Technical Specifications:** - **Input Voltage:** DC 10V - 60V - **Max. input current:** 10A - **Standby current:** 10mA - **Output voltage:** DC 12V - 60V, continuously adjustable - **Max. output current :** 10A (decreases with increasing voltage difference between input and output; enhanced heat dissipation is required above 10A) - **Constant Voltage (CV) Range:** DC 12V - 60V - **Constant Current (CC) Range:** 0.2A - 10A - **Output Power:** Input Voltage x 10A - **Operating Frequency:** 150 kHz - **Conversion Efficiency:** 92% - 96% - **Input Reverse Polarity Protection:** No - **Operating Temperature:** -40°C to +85°C - **Module Dimensions:** 85 mm (L) x 52 mm (W) x 21 mm (H) / 3.3 x 2.0 x 0.8 inches - **Weight:** Approx. 78 g / 2.7 oz - **Settings:** **Output Voltage Adjustment (CV-ADJ):** Turn the CV-ADJ potentiometer to set the desired output voltage, suitable for your battery or LEDs. Clockwise = decrease, counterclockwise = increase. **Output Current Adjustment (CC-ADJ):** To adjust the current, first turn the CC-ADJ potentiometer approximately 20 turns clockwise to its minimum setting. Then connect the load (e.g., LEDs) and adjust the potentiometer to obtain the required current. To charge a battery, connect the output after discharging the battery, then adjust the CC-ADJ current as needed. **Package Contents:** You will receive **1 x DC-DC Boost Power Supply Module**. **Important Notes:** 1. The input voltage should never be less than 10V, or the module may be damaged. 2. Never exceed the specified maximum voltage and current (input/output) values during operation. 3. For extended use, ensure adequate ventilation and heat dissipation to prolong the module's lifespan.