7" IPS Touchscreen CCTV Camera and Cable Tester IPC-9800MOVTADHS Pro Supports 8K and 4K 8MP HD-TVI CVI AHD SDI Testing IPC IP OPM VFL TDR Function POE HDMI VGA WiFi

Multifunctional Tester: Featuring a 7-inch IPS touchscreen with 1280 × 800 HD resolution, this CCTV tester boasts an intelligent operating system and rich interfaces. It is primarily used for security surveillance system installation and maintenance, network maintenance, cable testing, and more. This comprehensive, multifunctional testing tool is ideal for field workers. IP Camera Tester: The tester supports testing up to 8K 32MP 8160 × 3616P and 4K 12MP 4000 × 3000P IP cameras with real-time network traffic detection. It integrates Rapid Video, IPC testing, RTSP playback, and special HIK, DH, and ONVIF tools for quick setup of Hikvision and Dahua cameras. For HD coaxial testing, it supports up to 4K 3840 × 2160P 8MP TVI/AHD/CVI/EX-SDI, HD-SDI, 3G-SDI, and analog CVBS. The "Auto HD" application automatically recognizes the camera type and supports UTC, PTZ, and RS485 control, compatible with over 30 protocols such as PELCO-D/P. Cable Testing: Supports UTC cable testing, used to test network cable type, transmission rate, line sequence, and RJ45 connector status. The RJ45TDR function tests cable pair status, length, attenuation, reflectivity, impedance, tilt, and range up to 180 m (590 ft). The integrated digital cable tracer allows for quick location of the target cable among various types of metallic cables, with support for NCV detection and PoE PD testing. Network Function: Dual Gigabit network interface (RJ45), adaptive 10/100/1000 Mbps, supports network signal loopback. Integrated 2.4GHz Wi-Fi, 150 Mbps throughput, with access point creation and Wi-Fi analysis. Built-in professional network testing tools support IP analysis, traceroute, link monitor, link statistics, DHCP server, port blinking, ping testing, LLDP, and FTP server function for efficient network testing. DMM, OPM, VFL, TDR Testing: Digital Multimeter (DMM) for measuring AC/DC voltage, AC/DC current, resistance, capacitance, data hold, relative measurement, and continuity testing. Optical Power Meter (OPM) used for testing signal power and insertion loss of photoelectric equipment. Visual fault locator (VFL) with 650nm red laser, 10km range. TDR cable test for length measurement, fault point and short circuit detection, 1200 meters (3937 feet) range, compatible with all types of metallic cables