7.2V cordless grass shears – 2-in-1 with 83mm and 120mm blades – 1100 rpm motor for cutting lengths up to 8mm – 1500mAh Li-ion battery

General Description

The 7.2V cordless hedge trimmer and grass cutter in one device is the ideal tool for garden maintenance. With an 83mm wide grass blade and a 120mm long hedge trimmer blade, the attachment can be easily changed as needed. Its powerful motor reaches a speed of 1100 rpm and allows a maximum cutting thickness of 8mm – perfect for cutting small trees, branches, and shrubs. Thanks to its lightweight design (only 400 g) and ergonomic handle, it can be comfortably operated with one hand.

Technical Data

Battery Type: Li-Ion

Voltage: 7.2 V

Battery Capacity: 1500 mAh

Charging Time: 3–5 hours

No-Load Speed: 1100 rpm

Cutting Length (Trimmer): 120 mm

Cutting Width (Shears): 83 mm

Maximum Cutting Diameter: 8 mm

Compatibility and Accessories

1x Grass and Shrub Shears

1x Grass Blade

1x Shrub Blade

1x Instruction Manual

1x Charger

Installation

To change the blade: Proceed as follows:

Step Step 1: Rotate the tool. With one hand, move the blade up and down, and with the other hand, gently press down on the blade guard. Slide the blade guard onto the tool. Step 2: Align the two holes in the center and ensure the blade clicks into the four cylindrical nylon prongs. Step 3: Align the gear shaft in the center of the blade with the gear in the center of the tool. Step 4: Slide the blade guard forward until it clicks into place and locks securely. Application: These shears are ideal for cutting, trimming, pruning, and maintaining garden plants and arbors, including hedges, bushes, and small shrubs. It is simple and safe to use, making it an indispensable tool for both hobby and professional gardeners.

Further Information

Charger LED Indicator

Charging: The LED indicator glows red during charging.

Low Charge: The LED indicator remains red.

Operating/Fully Charged: All three LED indicators glow red-yellow-green.

Safety Lock

Press the safety lock on one of the sides before operating the on/off switch.

Release the lock after switching on the device.

Safety Instructions

Remove the safety key when the device is not in use.

Ensure the safety key is correctly inserted before using the device.