8 inch brush cutter head, 8 piece kit for brush cutters

LIGHTER WEIGHT: The wire brush weeder attachment's spline number is 10, does not work with Ryobi, Craftsman, Stihl FS38/FS40/FS50/FS76/FS311/FS350, Worx, Echo SRM, Homelite ST-285BC, Makita EM2652HLN.

THE INDESTRUCTIBLE CUTTER HEAD: The upgraded wire brush cutter head is made of a stainless steel disc and 0.5mm spring steel wire. The inner disc adopts the latest steel wire positioning hole design to prevent the steel wire from moving during use, firmer.

EASY TO INSTALL: The trimmer head is easy to install and remove, follow the installation steps in the installation manual in the package, simply place the trimmer head on the top bolt of the straight shaft trimmer, then use washer and nut to fix it can be used normally.

MULTIFUNCTIONAL BRUSH CUTTER ATTACHMENT: Edger wire brush is ideal for garden, driveway, lawn, green wall, parking lot, removes heavy rust, cement slag, paint, splashes and descaling, cleans the soldering edge.

WHAT YOU GET: The steel wire trimmer head kit contains: 1x Twist Knot Trimmer Brush, 1 x Thrust Washer, 1 x Rider Plate, 1 x Collar Nut, 1 x Maintenance Screwdriver, 1 x Bevel Washer, 1 x Allen Key, 1 x Wrench in T.

If you are looking for a lighter, stronger and more comfortable steel trimmer head, we are a good choice.

We strongly recommend that you check whether the model is compatible before making a purchase. We emphasize again: does not work with Ryobi,Craftsman, Stihl FS38/FS40/FS50/FS76/FS311/FS350, Worx, Echo SRM, HomeliteST-285BC, Makita EM2652HLN.

Wider compatibility

Compatible with

The steel cutting head is not a universal cutting head. It is compatible with 10 flute arbor trimmer, it is not suitable for 6 or 8 flute trimmer and bent shaft trimmer.

It is compatible with stihl FS55, FS55R, FS56, FS56RC, FS56C-E, FS56RC-E, FS70,FS70R, FS70RC-E, FS80, FS80R, FS85, FS85R, FS85T, FS90, FS90R, FS9191, FS94, FS, FS100R, FS108, FS110, FS111, FS111R, FS120, FS130, FS130R, FS131, FS131R,FS200, FS200R, FS240, FS240R, FS250, FS250R, FS260, FS260R, FS-KM, FS-MM, etc.

For Husqvarna, the nut does not work and it may not be necessary to install a cone washer. If your Husqvarna has a stock nut and it is not necessary to install tapered washers, it will work with Husqvarna128/128L/128LD/223L/225r/323L/327LS.

Products include:

1 x steel wire cutting head (15 cm/6 inches)

7 x adapter kits (as picture shows)