REF SP-BAL-077-ZME9269251

77-112mm BALANCE Self-levelling Pedestal -Wallbarn

In stock
In stock
Secure Payment
  • Delivery within 24 to 48 hours
Delivery method
  • At home between 23/09/2021 and 24/09/2021 for any order placed before 5 pm
Coming soon to ManoMano!
A product installation service at home by a (real) pro
Product details
  • Kind
  • Height
  • Use
    Ledger board (wood, composite)
  • Weight
    1000 kg
  • warranty
    15 years

Self-levelling adjustable height pedestals stocked in UK. Delivery within 48 hours of order confirmation. Superior finishes for paving and decking as headpieces tilt in all directions to achieve completely flat upper surface. Highest quality, leading specification.

Blemishes and ridges on sub-decks are accommodated by self-levelling head. Pedestal remains vertical and stable on irregular surfaces. BALANCE Self-levelling have been developed to give installers of paving slabs and decking extra scope and flexibility to accommodate differences in the deck surface below the pedestal.

Balance self-levelling pedestals should be used with Metal Edging Plate for best results on paving projects. For decking projects the joist sits between the lugs without fixings allowing movement and avoiding stress points.

This unique design is robust, stable and durable. The pedestal is injection moulded from virgin fibre polypropylene without fillers to withstand extremes of temperature and load. Weight tolerance over 1 tonne.

The headpiece is comprised of four separate parts which have been created to allow up to a 5% or 2.86° slope correction. The mechanism at the bottom of the headpiece allows smooth movement and positioning of the paving slab. Slips and sharp tilting are avoided owing to the superior design and solid manufacture. The headpiece section attached to this moving mechanism is 120mm in diameter with integrated positioning lugs moulded into it.

BALANCE Self-levelling EXTRA pedestals are also available with greater height adjustment per unit.

Accessory product :

Metal Edging Plate

Technical Information

Material : Virgin fibre injection moulded polypropylene

Weight Tolerance : 1,171kg

Max Temperature : Plus 75° C

Min Temperature : Minus 40°C

Base Plate Diameter : 200mm or 150mm

Extension Plate size : 5mm thick x 150mm diameter – for BAL-025 only

Headpiece Diameter : 120mm

Lug Height : 18.5mm

Lug width / thickness : 2mm

Degree of slope on head : 5% – approx. 2.86°"