1/5
85mm Speedometer 0-220km/h 2-in-1 Needle + LCD 12V/24V for Car Truck Boat
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Features:1.The pointer is driven by a stepper motor to accurately display the motor speed, with high reading accuracy and relatively simple drive control.The LCD screen clearly displays the mileage.2.Stepper motors are used in a full range of stepper gauges and are characterized by low power consumption, long service life, and high accuracy.Ultra-wide long-life operating voltage of 9–32 V, up to 36 V (≤1 minute).3.It is snapped into the wiring harness connector for the best secure connection, so the gauge can operate normally even under strong vibrations.4.Can be applied in all kinds of vehicle modifications and can be used for engine/generator sets, ships, construction machinery, agricultural machinery, automobile modification, etc.
5.With IP67 waterproof and dustproof rating, a 316L stainless steel bezel, and corrosion resistance, it is durable even in acidic, alkaline, and humid environments. It also features a curved lens for good anti-fog performance.
Specifications:Item Type: Speedometer
Material: ABS + 316L Stainless Steel
Backlight Color: Red or White
Operating Voltage: 12V/24V
Installation Diameter: 85mm or 3-3/8 inches
Display Range: 0-220 km/h, 999999 km
Operating Temperature: -30℃-+75℃
Storage Temperature: -40℃-+85℃
Protection Level: IP67
Application: 12V/24V all kinds of vehicles, boats, motorcycles, etc.
How to use:1. Cut an 85 mm diameter hole in the panel (your cabin panel and instrument panel), insert the instrument into the hole. The panel corresponding to the instrument panel is marked with a raised section. Cut a small notch at this position to ensure there is at least 85 mm (3 3/8 inches) of instrument panel behind the instrument. 2. After installing the instrument in the panel, screw it in place with the retaining ring. 3. Connect the wires; the instrument housing connects directly to a 12/24V power supply. 4. Insert the wiring harness and secure it firmly to the panel. Wiring Instructions: Red wire is positive, black wire is negative. The red wire will have a red backlight, the white wire will have a white backlight, and the remaining wire connects to the signal.
Package List:1 x Speedometer
1 x Wiring Harness
1 x Manual
Note:
5.With IP67 waterproof and dustproof rating, a 316L stainless steel bezel, and corrosion resistance, it is durable even in acidic, alkaline, and humid environments. It also features a curved lens for good anti-fog performance.
Specifications:Item Type: Speedometer
Material: ABS + 316L Stainless Steel
Backlight Color: Red or White
Operating Voltage: 12V/24V
Installation Diameter: 85mm or 3-3/8 inches
Display Range: 0-220 km/h, 999999 km
Operating Temperature: -30℃-+75℃
Storage Temperature: -40℃-+85℃
Protection Level: IP67
Application: 12V/24V all kinds of vehicles, boats, motorcycles, etc.
How to use:1. Cut an 85 mm diameter hole in the panel (your cabin panel and instrument panel), insert the instrument into the hole. The panel corresponding to the instrument panel is marked with a raised section. Cut a small notch at this position to ensure there is at least 85 mm (3 3/8 inches) of instrument panel behind the instrument. 2. After installing the instrument in the panel, screw it in place with the retaining ring. 3. Connect the wires; the instrument housing connects directly to a 12/24V power supply. 4. Insert the wiring harness and secure it firmly to the panel. Wiring Instructions: Red wire is positive, black wire is negative. The red wire will have a red backlight, the white wire will have a white backlight, and the remaining wire connects to the signal.
Package List:1 x Speedometer
1 x Wiring Harness
1 x Manual
Note:
Features
- BrandOTHERS
- ColourMulticolour
- MaterialStainless steel
- ManoMano ReferenceME242423382
- MMID918002662465
- Product codeQD-GB26Y59828
- EAN5002098298180
You are here:
'/%3E%3C/svg%3E){kind=small}