868.3 MHz Compatible Garage Door Transmitter/Opener for HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS Remote Control (BS2 1 2

This garage door remote control is more of a replacement than an original accessory. We recommend referring to the compatibility list below before purchasing. Compatible only with the following blue 868 MHz handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Akku, RollMatic, RotaMatic, VersaMatic, LineaMatic. 2-button Mini Bisecur BS remote control with a metal protective cover to prevent accidental button presses. And it's small enough to fit on a keychain, in a bag, or a backpack, making it easy to carry. This is a replacement garage door opener; it is not an original garage door opener. Special note: If your original remote is not listed, please do not purchase this product, even if your remote is 868 MHz. Two programming methods are available: copying the code from your original remote or programming via the receiver. Note: It has built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. This garage door opener is more of a replacement than an original accessory. We recommend referring to the compatibility list below before purchasing. Compatible only with the following blue 868 MHz handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Akku, RollMatic, RotaMatic, VersaMatic, LineaMatic. 2-button Mini Bisecur BS remote control with a metal protective cover to prevent accidental button presses. It's small enough to fit on a keychain, bag, or backpack, making it easy to carry. This is a replacement garage door opener; it is not an original garage door opener. Special note: If your original remote is not listed, please do not purchase this product, even if your remote is 868 MHz. Two programming methods: copying the code from the original remote/programming via the receiver. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. 868MHz Garage Door Opener, Replacement Garage Door Opener Compatible with HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS Remote Controls. Compatible Models: HS1-868-BS, HS4-868-BS, HS5-868-BS, HSE1-868-BS, HSE2-868-BS, HSE4-868-BS, HSP4-868-BS, HSD2-868-BS. For HSS4-868-BS. Note: Built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. How to program? 1) Press and hold the button on the new remote. If you want to register the code from the original remote, press and hold it. Then, press another button three times until the red LED light illuminates for 10 seconds, and then release all buttons. 2) Place the original remote as close as possible to the left side of the new remote. 3) Press the button on the original remote. You must copy the code until the LED flashes red and blue alternately. Check that the LED on the new remote flashes blue. If it doesn't, try moving the new remote as close as possible to the original remote. 4) When the blue light on the new remote flashes rapidly, the learning process is complete. Release all buttons. 5) Repeat the same procedure for the remaining buttons. Reset Method: Each button on the remote is assigned a new radio code by following these steps: (1) Remove the battery for 10 seconds. (2) Press and hold any button on the remote. (3) Insert the battery. The LED will flash slowly blue for 4 seconds. The LED will flash rapidly blue for 2 seconds. The LED will then remain solid blue. (4) As soon as you release the remote control button, all radio codes will be reassigned. Note: If the remote control button is released prematurely, no new radio codes will be assigned.