868 MHz garage door remote control, 2 pieces, compatible with Somm-4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4 channels, manual transmitter for garage doors
You may also like
Compare with similar items
Product information
Description
Identical functions to the original remote: Although not an original remote, it offers the same functions as the original Sommer remote, ensuring smooth operation.
Easy programming with the original motor: The remote must be programmed with the original receiver motor to function correctly.
Customer service available: Should you experience any problems after purchase, please contact us. Our customer service team will be happy to assist you.
Compatibility with Sommer motors: Compatible with 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, 4035/4035/4000. 00 40 35 V. 002, please do not purchase this product if your model is not listed. Frequency: 868 MHz, Transmission range: 50 meters, Pairing required. 4 buttons to control up to 4 garage door openers. Functions identical to the original remote: Although not an original remote, it offers the same functions as the original Sommer remote, ensuring smooth operation. Easy programming with the original motor: The remote must be programmed with the original receiver motor to function correctly. Customer service available: If you experience any problems after purchase, please contact us. Our customer service team will be happy to assist you.
Technical Specifications:
Decoder: Rolling Code
Frequency: 868 MHz
Channels: 4
Batteries: CR2032 3V (included with the remote control, plus one spare pair of batteries)
Range: 10–50 meters outdoors
Programming: Programming with the garage door opener
Instructions for Use:
The remote control has the same functions as the original remote control.
After receiving the remote control, you must program it according to the operating instructions of the original remote control.
1. Locate the learn/code button on the motor. It is usually located under the lamp shade or on the back of the motor.
2. Press the learn/code button once and release it. The indicator light will illuminate.
3. Press the button on the remote control 4 to 5 times in a row (or hold it down for 5 to 6 seconds).
4. The code indicator light will blink a few times and then go out. This indicates that the remote control has been coded.
5. Test the remote control's functionality.
Caution:
1. Do not purchase this product if your original model is not listed in this compatibility list.
Only compatible with
4014 tx03-434-2
4022 tx03-434-2
4013 tx02-434-4-xp
Not compatible with 868 MHz remote controls.
2. You need access to the receiver. Make sure you have access to the receiver or can open it before purchasing.
Features
- BrandCATHERINE
- Length5 cm
- Width5 cm
- Height5 cm
- Weight100 g
'/%3E%3C/svg%3E){kind=small}