868 MHz garage door remote control, 2 pieces for 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4-channel remote control, hand-held transmitter for garage doors

Product Features

Frequency: 868 MHz, 868.3 MHz.

Number of Buttons: 2 Channels.

Battery Type: CR2032 Battery.

Compatible Models:

4020 TX03-868-4

4026 TX03-868

4020V000

4026V000

Note: Not compatible with other brands and frequencies.

Programming Method:

Remove the code from the new remote control to program it. This increases the success rate.

Removing the Code:

Press and hold the Learn or Code button on the receiver until the first light flashes slowly and then stays on until the other light illuminates. This means the code has been deleted.

Programming:

1. Locate the learn button or code key on the radio receiver or port reader and press it briefly. The LED on the driver will light up.

2. Press and hold the desired button on the remote control until the driver LED flashes rapidly. Release the button; the driver LED will turn off.

3. The remote control has been successfully programmed to the user and is now ready for use.