868 MHz Gate Remote Control, Remote Control Compatible with XT2 868 SLH LR, XT4 868 SLH LR, 4-Channel Garage Door Remote Control, Black (Set of 2)

【Compatible Models】This garage door remote is compatible with 868 MHz models such as XT4 868 SLH LR, XT4 868 SLH, XT2 868 SLH LR, XT2 868 SLH, T2 868 SLH, T4 868 SLH, DL2 868 SLH, DL4 868 SLH, DL4 868 SLH, SLH, TML, 2 868 SLH garage door openers, TML4 868 SLH, and more. 【Frequency】The 2-channel garage door remote operates on 868 MHz frequencies. Please note that this is not an original garage door opener. Note: Not compatible with 433 MHz remotes. 【Programming Methods】There are two programming methods. The first programming method uses a rolling code with the receiver. The second method involves copying keys one by one; each key stores its own password. Compatible models: T2 868 SLH, T4 868 SLH, DL2 868 SLH, DL4 868 SLH, XT2 868 SLH, XT4 868 SLH, XT2 868 SLH LR, XT4 868 SLH LR, TML2 868 SLH, TML4 868 SLH. Note: Not compatible with 433 MHz garage door openers. Copying remote control codes? Four-button remote. 1. Clear codes: Press and hold buttons 1 and 2 until the LED flashes three times. Release button 2, but keep button 1 pressed, then press button 2 three more times. The LED will flash rapidly, confirming that all data has been erased. Note: After being turned off, the LED will no longer light up with each button press. 2. Select the target button: Briefly press the button you want to copy. The LED will change from a rapid flash to a steady light. Note: The light will remain steady for approximately 10 seconds. 3. Copying the remote: Step A: Press and hold the corresponding button on the original remote near the copy remote. The LED on the copy remote will flash slowly three times, then turn off to indicate successful pairing. Step B: (Recovery function): To restore functionality, press and hold buttons 3 and 4 simultaneously until the LED flashes three times.