868.3 MHz Manual Gate/Garage Door Remote Control – Compatible with HSE4/HSE2/HS4/HS1/HSS4/HSP4 – Model BS2 (2 buttons)

This garage door remote control is a replacement part and not an original accessory. We recommend checking compatibility with your device using the following list before purchasing.
Compatible only with the following blue 868 MHz hand transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery, RollMatic, RotaMatic, VersaMatic, LineaMatic.
Mini Bisecur BS 2-button remote control with metal protective cap to prevent accidental presses. It's so small it fits on a keychain, in a purse, or a backpack, making it easy to carry. This is a replacement garage door opener; it is not an original garage door opener. Important note: If your original remote is not listed, do not purchase this remote, even if it supports 868 MHz. Two programming methods: Copy the code from your original remote or program it using the receiver. Note: It has built-in rolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), this garage door opener will not work. This garage door opener is a replacement rather than an original accessory. Please check the compatibility list below before purchasing. Compatible only with the following blue 868 MHz hand-held transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery, RollMatic, RotaMatic, VersaMatic, LineaMatic. Mini Bisecur BS 2-button remote control with a protective metal cap to prevent accidental activation. Its compact size makes it easy to attach to a keyring, handbag, or backpack. This remote control is a replacement part for your garage door opener and not an original part. Important note: If your original remote control is not listed, please do not purchase this product, even if your remote control operates at 868 MHz. Two programming methods: Copy the code from the original remote control or program it using the receiver. Note: Integrated scrolling text display (blue LED)! If your original remote control uses fixed codes (red LEDs), it will not work.

868 MHz Garage Door Opener, Replacement Garage Door Opener compatible with remote controls HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS and HSP4-868-BS
Compatible Models
HS1-868-BS
HS4-868-BS
HS5-868-BS
HSE1-868-BS
HSE2-868-BS
HSE4-868-BS
HSP4-868-BS
HSD2-868-BS
For HSS4-868-BS
Note: Integrated rolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it won't work. How do you program the remote? 1) Press and hold the button on the new remote whose code you want to copy from the original remote. While holding the button down, press another button three times until the red LED lights up for 10 seconds. Then release all buttons. 2) Place the original remote as close as possible to the left of the new remote. 3) Press the button on the original remote. Copy the code until the LED flashes red and blue alternately. Check if the LED on the new remote flashes blue. If not, try moving it as close as possible to the original remote. 4) When the blue LED on the new remote flashes rapidly, programming is complete. Release all buttons. 5) Repeat the process for the remaining buttons.
Reset:
Each button on the remote will be assigned a new radio code. To do this, proceed as follows: (1) Remove the battery for 10 seconds. (2) Press and hold a button on the remote control. (3) Reinsert the battery. The LED will blink slowly blue for 4 seconds. The LED will blink quickly blue for 2 seconds. It will then glow solid blue. (4) As soon as you release the button on the remote control, all radio codes will be reassigned. Note: If the button on the remote control is released too soon, no new radio codes will be assigned.