868.3 MHz remote control for gates and garage doors, compatible with Hörmann BS HSM4 HSE2 HS1 HS4 HSZ1 HSZ2, garage door opener – White (2-pack)--DTEKGAZ

Compatible only with the following blue 868 MHz handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Note: Integrated scrolling codes (blue LEDs)! If your original remote control uses fixed codes (red LEDs), this device will not work. Compatible models: For HORMANN HS1-868-BS, HORMANN HS4-868-BS, HORMANN HS5-868-BS, HORMANN HSE1-868-BS, HORMANN HSE2-868-BS, HORMANN HSE4-868-BS, HORMANN HSP4-868-BS, HORMANN HSD2-868-BS, HORMANN HSS4-868-BS. Programming Instructions: Press and hold the button on the new remote. To program the code of the old remote, press and hold the button on the new remote. Press another button three times until the red indicator light illuminates for 10 seconds. Then release all buttons. Place the old remote as close as possible to the left of the new remote. Press the button on the old remote. Copy the code until the LED flashes alternately red and blue. Check if the LED on the new remote flashes blue. If not, move as close as possible to the old remote. When the blue light on the new remote flashes rapidly, the learning process is complete. Release all buttons. Repeat the process for the remaining buttons. Resetting: Assign a new radio code to each button on the remote by following these steps: Remove the battery for 10 seconds. Press and hold a button on the remote. Reinsert the battery. The LED will flash blue slowly for 4 seconds. The LED will flash blue rapidly for 2 seconds. The LED will then glow blue for an extended period. When you release the button on the remote control, all radio codes will be reassigned. Note: If the button on the remote control is released too soon, no new radio codes will be assigned. Technical specifications: Frequency: 868.3 MHz, Channels: 4, Code: Rolling Code, Battery: CR2430 battery (included), 868.3 MHz gate remote control