868MHz Garage Door Remote Control, 2 Pcs Gate Remote for Somm-4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4 Channels, Manual Transmitter for Garage Door

Compatibility with Sommer motors: Compatible with 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, 4035/4035/4000. 00 40 35 V. 002. Please do not purchase if your model is not listed. Frequency: 868 MHz, transmission distance: 50 meters, pairing required for use. 4 buttons to control up to 4 garage door openers. Functions identical to the original remote: Although not an original remote, it offers all the same functions as the original Sommer remote, ensuring trouble-free operation. Easy programming with the original motor: The remote control must be programmed with the original receiver motor to function correctly. After-sales service available: If you have any problems after your purchase, please feel free to contact us. Our customer service is ready to assist you. Compatibility with Sommer motors: Compatible with 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, 4035/4035/4000. 00 40 35 V. 002. Please do not purchase if your model is not listed. Frequency: 868 MHz, transmission distance: 50 meters, pairing required for use. 4 buttons to control up to 4 garage door openers. Functions identical to the original remote: Although not an original remote, it offers all the same functions as the original Sommer remote, ensuring trouble-free operation. Easy programming with the original motor: The remote must be programmed with the original receiver motor to function correctly. After-sales service available: If you have any problems after your purchase, please do not hesitate to contact us. Our customer service is ready to assist you. Technical specifications: Decoder: Rolling code. Frequency: 868 MHz. Channels: 4. Batteries: CR2032 3V (included in the remote and a spare pair of batteries). Transmission distance: 10-50 meters outdoors. Programming: Programming with the garage door opener. Instructions: The remote has the same functions as the original remote. Once you receive the remote, you must program it following the manual for the original remote. 1. Locate the learning/coding button on the motor. It is usually located under the lampshade or on the back of the motor. 2. Press and release the learning/coding button once. The indicator light will illuminate. 3. Press the remote control button 4 to 5 times in succession (or hold it down for 5 to 6 seconds). 4. The code indicator light will flash a few times and then turn off, indicating that the remote control has been coded. 5. Test the remote control's operation. Caution: 1. Do not purchase if your original model is not listed in this compatibility information. Compatible only with 4014 tx03-434-2, 4022 tx03-434-2, and 4013 tx02-434-4-xp. Not compatible with '868 MHz' remote controls. 2. You must have access to the receiver. Make sure you have access to the receiver/opening before purchasing.