868MHz Garage Door Remote Control, Gate Remote Control, 4 Channels, Compatible with HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS

Description: 1. Material: Metal and ABS. 2. Buttons: 4 buttons. 3. Frequency: 868 MHz. 4. Battery: Battery included (CR2032). 5. Range: 30m-50m (open area). 6. Face-to-face cloning - 100% compatible models: For HS1-868-BS, HS4-868-BS, HS5-868-BS, HSE1-868-BS, HSE2-868-BS, HSE4-868-BS, HSP4-868-BS, HSD2-868-BS. For HSS4-868 rolling code programming methods: Copy the code from the original remote: Note: Rolling code is factory set (blue LED)! If your original remote uses a fixed code (red LED), it will not work. 1. Press and hold the button on the new remote control onto which you want to program the code from the original remote. While holding it down, press any other button three times until the LED lights up red. Then release all buttons. 2. Place the original remote control as close as possible to the left or right of the new remote control. 3. Press and hold the button on the original remote control for 13 seconds until the indicator light flashes red and blue alternately. The learning process is complete when the LED on the new remote control flashes rapidly blue. Release all buttons. 4. The new remote control is now programmed. 5. Repeat the process for the remaining buttons. Note: You have 15 seconds to transfer the code. The process must be repeated if the radio code is not successfully transmitted within this time. Programming with the receiver: If the original remote control is lost, the new remote control can be programmed directly with the receiver. 1. Locate the "Learn" or "Program" button on the receiver, press it, and the indicator light will begin to flash. 2. While the light is flashing, press the button on the new remote control until the receiver's indicator light flashes rapidly, indicating that the new remote control has been successfully programmed.