8mm Three-Jaw Chuck Adapter for Electric Drill Driver (Long Shank)

Features:

1. Quick and easy accessory replacement on the multi-tool without changing collets.
2. Suitable for most power tools such as electric drills, grinders, and screwdrivers.
3. Use this chuck to convert any cordless screwdriver or impact driver into a drill or router.
4. Unlimited use in cars, garages, warehouses, offices, homes, etc.
5. Suitable for electric grinders with 7mm or 8mm spindles. This size cannot be used.

Specifications:

Features:
1. Quick and easy accessory replacement on a multi-tool without changing collets.
2. Suitable for most power tools such as electric drills, grinders, and screwdrivers.
3. Use this chuck to convert any cordless screwdriver or impact driver into a drill or milling machine.
4. Unlimited use in cars, garages, warehouses, offices, homes, etc.
5. Suitable for electric grinders with 7mm or 8mm spindles. This size cannot be used.
Specifications:
Condition: 100% Brand New
Item Name: Drill Collet
Clamping Range: 0.5 to 3.2mm
Total Length: Approx. 18mm / 0.7in
Thread Diameter: Approx. 8 mm / 0.31 inch
Type: Short shank, long shank (optional)
Application: Suitable for electric grinders with 7 mm or 8 mm spindles. This size cannot be used.
Package List:
1 * Drill Collet
Note:
1. The diameter of the output shaft of the electric grinder and the compatible flexible shaft is 7.9 mm.
2. If the housing of the front part is hollow between the output shaft and the output shaft, the length of the output shaft protruding outside must be greater than 10 mm.
3. If the housing and the output shaft of the front part are almost solid, the length of the output shaft protruding outside must be greater than 13 mm.
4. On the small flexible shaft, the hollow section between the handle head and the output shaft must be greater than 13.8 mm (some small flexible shafts on the market are not suitable; please take care when purchasing).