900W Boost Converter Constant Current Voltage Module DC Input 9-60V DC Output 10-120V Max 15A High-precision transformer regulator with 1.77-inch TFT screen

Features: 1. Constant current and constant voltage design; this boost converter has a DC9-60V input and a DC10-120V output, a high conversion efficiency of 85%, and a maximum current of 15A. 2. 1.77-inch TFT digital display screen clearly shows real-time output voltage, real-time output current, real-time output power, trigger mode, input voltage, etc. 3. When the input is activated, the output output has constant power, and the voltage is equal to the real-time output voltage displayed on the interface. 4. The module maintains an output voltage after being connected to the input; ON and OFF only indicate whether the boost program is running or not, not whether the output voltage is enabled or disabled. 5. Two types of power-up program trigger modes: AUTO mode: the power-up program runs automatically; ---- mode: the power-up program does not run; press and hold the "SET" button for 6 seconds to change the trigger mode. 6. Multi-parameter setting: setting the supported voltage, setting the current, setting the data group. Double-click the "SET" button to access the parameter setting mode. 7. Supports calling up data groups. Click "+" or "-" to change data groups. Calling only does not start the boost. 8. Starts/stops the boost program. Click the "OK" button in the OFF state to run the program. The output voltage will increase to the set voltage. Click "OK" to stop the program in the ON state, and the output voltage will drop to the input voltage. Specifications: Constant current and constant voltage design, this boost converter has a DC9-60V input and a DC10-120V output voltage, a high conversion efficiency of 85%, and a maximum current of 15A. The 1.77-inch TFT digital display clearly shows the real-time output voltage, real-time output current, real-time output power, trigger mode, input voltage, etc. Two types of power-on program trigger modes support multi-parameter adjustment, making it reliable and convenient to use. Features: Constant current and constant voltage design, this boost converter has a DC9-60V input and a DC10-120V output voltage, a high conversion efficiency of 85%, and a maximum current of 15A. The 1.77-inch TFT digital display clearly shows real-time output voltage, real-time output current, real-time output power, trigger mode, input voltage, etc. When the input is activated, the output end has continuous power output, and the voltage is equal to the real-time output voltage displayed on the interface. The module maintains an output voltage after being connected to the input. ON and OFF only indicate whether the boost program is running or not, not whether the output voltage is enabled or disabled. There are two types of trigger modes for the power-up program: AUTO mode: the power-up program runs automatically; ---- mode: the power-up program does not run. Press and hold the "SET" button for 6 seconds to change the trigger mode. Multi-parameter adjustment, support voltage adjustment, current adjustment, data group adjustment: double-click the "SET" button to enter parameter setting mode. Support refers to the data group; click "+" or "-" to change the data group. This only applies to selected data groups; it does not start the boost function. To start/stop the boost program, click the "OK" button in the OFF state to run the program; the output voltage will increase to the set voltage. Click "OK" to stop the program in the ON state; the output voltage will drop to the input voltage. Current: 0 ~ 15 A Conversion efficiency: 85% Operating frequency: 150 KHZ Short-circuit protection: 20 A fuse (non-self-healing) Operating temperature: -40 ℃ ~ 85 ℃ Heat dissipation mode: active heat dissipation, connected to the input fan, continuous operation Voltage setting display: 009.0 V ~ 120.0 V Current setting display: 00.01 A ~ 15.00 A Output ripple: ≤ 50 mV Storage group: 10 groups Standby power consumption: less than 150 mA (measured at 12 V input) Item size: 110 * 105 * 48 mm / 4.33 * 4.13 * 1.89 inches Item Weight: 235 g / 8.29 ounces Package Size: 90 * 110 * 120 mm / 3.54 * 4.33 * 4.72 inches Package Weight: 280 g / 9.88 ounces Packing List: 1 * Boost Conversion Module