952 953 954 955 Printhead Replacement Parts for HP OfficeJet Pro 7740 7730 7720 8210 8710 8730 8740 8216 8720 8725

Features: 1. Material: The Premium 952 printhead housing is made of high-quality ABS, which is more abrasion-resistant and has been repeatedly tested to ensure printhead performance and proper printer operation. 2. Compatible Models: Compatible with HP OfficeJet 7740, 7730, 7720, 8210, 8710, 8730, 8740, 8216, 8720, and 8725. 3. High Performance: Upgraded 952 printhead chip, faster ink cartridge identification, smooth printhead ink jet operation, printer protection, and bright, clear color printing make your life more colorful. 4. Easy Installation: This printhead kit contains only one printhead; no other accessories or additional tools are needed. Simply push the printhead into place to complete the installation, saving you time. 5. Note: Be careful when installing the nozzle; be sure to turn off the power before storing it. Specifications: Item Type: Printhead Product Material: ABS Applicable: for HP OfficeJet Pro 7740 7730 7720 8210 8710 8730 8740 8216 8720 8725 How to Use: Instructions: Customers are required to perform a factory reset and reinstall the driver: 1. Press and hold the "Windows" and "X" keys on the keyboard simultaneously to access the Control Panel. 2. Then select View devices and printers. 3. Select "Advanced printer settings" to search for connected and available printers. 4. Next, click "The printer I want is not listed." 5. Manually add local printers. 6. Select "Use existing port." 7. Select the printer's "manufacturer" and "printer model". 8. Select "Replace current driver". 9. Enter the "Printer name". 10. Choose to share the printer. 11. Click "Print Test Page" to test if it is normal, and click "Finish". Package List: 1 x Printhead Note: Solution for incompatibility: Reset the printer. Follow the steps below to reset the printing device. Turn on the printer (if it is not already turned on). Wait until the printer has completely shut down before proceeding. After turning on the printer, disconnect the power cord from the back of the printer. Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord into the wall outlet. Note: HP recommends plugging the printer's power cord directly into a wall outlet. Reconnect the power cord to the back of the printer. Turn on the printer (if it hasn't already turned on automatically). The printer may take some time to warm up. The printer lights may flash, and the car may move. Wait until the printer is fully warmed up and has come to a complete stop before proceeding. If the above methods do not resolve the compatibility issue, you will need to replace the cartridge and ink with genuine original ink.