A20 Replacement Float for Polaris Pool Cleaners - Part Compatible with Polaris 280, 360, 180 and Other Models

Product Overview

This high-quality replacement float, model A20, is the key component to restoring the correct buoyancy and balance of your Polaris pool cleaning robot. Designed as a reliable and economical alternative to original parts, it is specifically compatible with the popular Polaris 280, 360, and 180 models. By replacing your old, worn, or damaged float, you ensure your cleaner maintains the correct cleaning position and optimal efficiency on all surfaces of your pool.

Compatibility and Identification

Float Model: A20

Compatible Robots: Polaris 280, Polaris 360, Polaris 180, and generally all Polaris models using the float reference A20.

Important Check: It is strongly recommended to check the model number (A20) on your old float before purchasing to guarantee compatibility.

Function & Key Benefits

✅ Performance Restoration: Restores the robot's nominal buoyancy, ensuring perfect contact with the pool walls and floor for impeccable cleaning.

✅ Economical & Convenient: An affordable replacement solution to avoid purchasing a complete module or a new robot.

✅ Instant Installation: Attaches to the Polaris cleaner arm in seconds. No tools required.

✅ Durable Design: Made of sturdy ABS or polyethylene plastic, resistant to UV rays, chlorine, bromine, and temperature variations.

✅ Precision: Weight and volume calibrated to exactly match the specifications of the original A20 float.

Installation Instructions (Quick and Easy)

Locate the float arm on your Polaris cleaner.

If an old float is present, simply remove it by sliding it off the arm.

Slide the new A20 float onto the arm until it clicks or locks into place.

Check that it is securely attached and does not rotate freely.

Place the robot back in the water and observe its buoyancy.

Adjust the float's position on the arm to optimize the brush's angle of attack if necessary.

Package Contents

2 x Replacement A20 Floats for Polaris.

Operation and Troubleshooting Tips

Why Replace It? A cracked, waterlogged, or lost-buoyancy float will cause the robot to "dip" or "lift its head," drastically reducing its efficiency.

Simple Test: If your original A20 float sinks or doesn't float well on the surface of the water in a bucket, it needs to be replaced.

Maintenance: Rinse it with clean water when the robot is taken out of storage for the season.

Warning: This product is a compatible replacement part.

To ensure optimal performance, use it with other wear parts (jets, brushes, wheels) in good condition. Bring Your Polaris Back to Life! Don't let a faulty float compromise your pool cleaning. With this precise and affordable replacement part, your Polaris 280, 360, or 180 will regain its full agility and efficiency for a perfectly clean pool. Order your A20 float today! Compatible replacement part. Polaris is a registered trademark. This product is not manufactured or sponsored by the original manufacturer.