1/5
ABS plastic wall mold, DIY production, recyclable, wear-resistant, concrete shapes for garden and home decoration
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
Product information
Description
Features:
1. Reusable: You can create decorations in any style you like; it can be reused, saving you money.2. ABS Material: The wall mold is made of high-quality, sturdy ABS material, which is wear-resistant and durable, and can be used for a long time.
3. Easy to Use: This unique mold is easy to use. Simply pour cement or concrete into the mold and let it cool, then unmold to obtain a beautiful shape.
4. Great Decoration: With these molds, you can create beautiful concrete decorations for your home decor. DIY projects allow you to create decor that matches your style.
5. Applicable scene: Black-look plastic concrete formwork, neat finish, very suitable for walls, parks, courtyards, and home decoration.
Specifications:
Item Type: Wall Mold FormMaterial: ABS
Weight: Approx. 1000g / 35.3 oz
Overall Product Size: Approx. 49 x 68.5 x 2.6 cm / 19.3 x 27.0 x 1.0 inch
Single Brick Size: Approx. 24.5 x 6.5 cm / 9.6 x 2.6 inches
Application: Suitable for parks, gardens, and home decoration
How to use:
The mold is filled with cement mortar, compacted (making sure all voids are filled), and smoothed. The model is removed after the mortar has dried.Package list:
1 Xwall mold formNote:
Prepare the molds: Before mixing the concrete, make sure the molds are clean and free of dirt. If it has been used before, clean it with soapy water or rubbing alcohol. Brush just a little light vegetable oil or mold release agent into the forms. A mold release agent is recommended, but not required. Not using a release agent will make the stone harder to release, and you'll need to be more careful not to damage the mold. However, too much release agent can cause bubbles to form on the surface. Mixing the concrete: Always wear appropriate safety equipment (rubber gloves and a particulate face mask) when mixing concrete. The mixture can be prepared by hand using a suitable concrete mix. It is very important to take the time to mix everything thoroughly. Tip: Adding color to the concrete will make the stepping stones look more natural and attractive. Filling the mold: Fill the bottom of the mold with concrete and press firmly to remove any air bubbles. Then, fill the mold completely to the top and smooth the top surface by hand so the concrete is flat and level. Finish filling the mold by tapping and shaking to remove as many air bubbles as possible. Curing and demolding: Once the molds are filled, place them on a horizontal table. Cover with plastic wrap and wait less than 24 hours for it to harden. The plastic wrap covering the concrete will help retain moisture in the room, much like a greenhouse, which will minimize cracking. Once the stone has hardened, carefully and gradually pull it in all directions until it sounds resonant.Features
- BrandOTHERS
- Length15 cm
- Width15 cm
- Height35 cm
- ColourWhite
You are here:
'/%3E%3C/svg%3E){kind=small}