AC 85V-220V Infrared PIR Motion Detector Switch for Charging Light

It uses infrared rays from human movement as control signal sources. When someone enters the detection field, it immediately starts the controlled load.

--Specifications--

Material: ABS

Dimensions: 6 x 4.7 x 15.6 cm

Detection Range: 18 degrees

Voltage: AC 85V-220V

Detection Distance: <12 meters

Operating Humidity: Less than 93% RH

Installation Height: 1.8 - 2.5 m

LUX Setting: 2 - 2000 Lux (adjustable)

Induction Time Range: 5s - 6min (adjustable)

Installation: open type, (16 mm hole); Keep the switch side facing down

--Wiring Notes--

N-Blue (zero line)

L-Brown (Firewire connection)

Output - Red (sensor output line)

Blue and brown for power

Blue and red for charging (lamps)

-- Switch Setting--

1. LUX can set day or night operation

A: If you switch to the "SUN" symbol, it will only work during the day

B: If you switch to the "MOON" symbol, it will only work at night

2. TIME is the switch for setting the induction time range (5 ± 2 s to 4 ± 1 min), which refers to the time the sensor remains off after a person leaves the sensor area. 3. SENS is the sensor's sensitivity; it is not normally required. --Special Statement-- * Due to differences in lighting and screen settings, the color of the items may be slightly different from the pictures. * Due to manual measurement, please allow for slight measurement deviations.