AC85-265V wireless switch, wireless remote control switch, no wiring required, one switch + two controllers

General Description

This smart wireless switch kit combines a remote control and a receiver, allowing you to remotely control the switching on and off of electrical devices in your home. Supporting both 2.4 GHz Wi-Fi and RF433 radio frequency, it offers simple installation, extended range, and high reliability, ideal for automating lighting or other equipment and simplifying daily life.

Technical Specifications

• Housing Material: ABS + PC
• Color: White
• Rated Voltage: AC 85-265V (compatible with 110V/220V/230V)
• Range (open area): 20 to 100 meters
• Signal Types: 2.4 GHz Wi-Fi + RF 433 MHz
• Wiring Method: Neutral and live wires (2 wires)
• Distance between Mounting holes: 60 x 60 mm Max. load power: 300 - 1200 W Relay life: > 400,000 cycles Features and Benefits: Intelligent Remote Control: Control your devices (lights, fans, etc.) remotely from anywhere in the house via the remote control or a smartphone app (depending on Wi-Fi model). Particularly convenient for the elderly or those with reduced mobility. Easy and Universal Installation: Quick installation without complex wiring. The receiver simply connects between the power supply and the device to be controlled. Compact design suitable for most flush-mounting boxes and junction boxes.
• Extended Range and Penetration: The powerful RF signal passes through walls and doors without interference, providing an effective range of 20 to 100 meters in open spaces.
• Reliability and Durability: Equipped with a high-quality relay with a lifespan exceeding 400,000 operations. Wide input voltage range (85-265V AC) for international compatibility.
• Scalable and Programmable System: You can pair multiple remote controls with multiple receivers, create scenarios, and expand the system as needed.

Installation and Configuration

1. Verification: Before purchasing, confirm compatibility with your electrical installation and the device to be controlled.
2. Receiver Installation: Turn off the power. Open the junction box or existing switch. Connect the receiver between the power supply (live and neutral) and the device. Close it.
3. Mounting: The receiver can be mounted on a DIN rail or in a box using the mounting holes (60mm spacing).
4. Pairing: Turn the power back on. Pair the remote control with the receiver according to the instructions.

Package Contents & Notes

• Typical Contents: 1 Transmitter (Remote Control), 1 Receiver (Switch Module), mounting screws, instructions.
• Important Note 1: It is crucial to confirm the product's compatibility with your installation model before purchasing.
• Important Note 2: Due to manual measurement, a 1-2 cm tolerance in dimensions is possible.
• Safety: Installation must be carried out by a qualified electrician with the power switched off. Observe the maximum permissible power.