AdBlue OBD Emulator for MAN Euro 6 Trucks – Complete Deactivation of AdBlue System, DPF and NOx Sensors

🔧 General Description: Professional OBD2 AdBlue emulator for MAN Euro 6 trucks — a reliable and discreet solution for disabling the AdBlue system, NOx sensors, and DPF regeneration. Ideal for professionals and mechanics looking for a simple alternative, without diagnostic errors or check engine lights. 📊 Technical Specifications: Type: OBD2 diagnostic tool; Material: High-strength, corrosion-resistant, robust, and durable ABS; Systems that can be disabled: AdBlue system (complete), NOx sensor, DPF system, DPF temperature sensors, DPF regeneration; Compatibility: Designed specifically for MAN Euro 6 trucks; Includes: 1 OBD2 emulator. ⚙️ Installation: Quick and intuitive installation — no setup or learning required. Attach the emulator under the metal cover of the AdBlue pump, on the right-hand side, behind the cab. Unplug the AdBlue pump connector and plug in the emulator instead. ✅ Operation: Once installed, you can disable or re-enable the AdBlue system at any time. Safely remove the AdBlue sensors (temperature, level, pump, ECU), DPF sensors, and upstream NOx sensor. The downstream NOx sensor remains functional to ensure DPF regeneration—a stable, quiet, and efficient solution. ℹ️ Other information: Fuses to remove: F894 (AdBlue tank multi-sensor), F738 (+30 AdBlue pump), F1084 (upstream NOx sensor). Fuse F737 becomes the emulator fuse. To disconnect the downstream NOx sensor: preferably remove pin 10 on connector X3212 (16-pin TE connector, yellow key, visible at the rear of the engine, right side).