Adhesive foam door and window seals, windproof door bottom strips 15 mm x 8 mm x 2 m (black)

Easy to install: Simply peel off the red film on the surface to be installed. The use of a thick backing, strong adhesive, and non-slip material ensures that this doorstop can be used in humid environments, such as bathrooms, laundry rooms, etc.

Keeps out noise and insects: The three-layer soundproof design reduces annoying noises fivefold and prevents dust and insects from entering.

Note: 1. Remove the red film. 2. Clean the door to ensure it is free of dust or oil and keep it dry. 3. After installation, please press the item firmly to secure it.

4. Note: The adhesive part of this product must not come into contact with water or oil, otherwise it will lose its strong adhesion.

Size: 100 cm x 5 cm, can cover most door or wall gaps.

Description: 1. Clean/remove any grease from the door surface beforehand. 2. Cut to the correct length. 3. Peel off the red protective strip, being careful not to peel off the adhesive at the same time. 4. Install the door seal on the door. It takes less than five minutes to install and will provide a comfortable room for a long time.

Material: TPE.