Adhesive Mounting Discs with 3M Adhesive, Set of 3 Adhesive Discs for Dashboard (70mm) for Mounting GPS, Car Phone Holder, Dashboard Camera, Sat Nav

Set of 3 Dashboard Mounts: This set of 3 adhesive mounting discs fits all 70mm diameter dashboard phone holders and adheres to the windshield and dashboard.

【Easy to Install】Note:

This dashboard mount is not suitable for waxed dashboards. Clean the area to be mounted and keep it dry.

② When the adhesive strip is attached, apply even pressure and hold the strip in place for 10 to 30 seconds.

③ After application, it is recommended not to use immediately to maintain the stability of the adhesive. The best effect is achieved after 6 hours of application; the longer the application time, the stronger the adhesion.

3M Adhesive Pads and Compatibility: The adhesive mounting disc can be widely applied to car cameras, car phone holders, GPS mounts, and more.

High-Quality Adhesive Discs: They are heat and moisture resistant, protect the adhesive surfaces from scratches, and peel off easily without leaving any sticky residue.

Package Contents: 3 x 70mm Round Pads.

Includes

3 Suction Cup Adhesive Pads.

Humanized Design

Protruding Label Design for Easy Removal of Release Film

Quick Release Suction Cup Mount

The dashboard comes with an easy-release notch.

Product Description

Is your suction cup base not strong enough and will it slip? This super-adhesive pad helps your suction cups lock securely in place.

Features

1. The main material is ABS, and the backing is a super-strong 3M VHB adhesive.

2. Use 3M adhesive pads to ensure the suction cup camera mount is suitable for both smooth and uneven dashboard surfaces.

3. The adhesive is easy to remove without leaving any residue.

4. When you need to move it, simply peel it off from the side and slowly pull it upwards.

5. The disc surface is large enough to perfectly fit the suction cup base, suction cup mount, and other devices with suction cups.

6. Caution: Do not use on a large curved surface.

How to Use

1. Clean the surface to be installed.

2. Peel off the sticker and carefully stick it in place. Remember not to touch the adhesive pad with your fingers.

3. Press for at least 30 seconds to ensure the 3M VHB adhesive is fully bonded to the contact surface.

4. Do not use within 12 hours.

Specifications

Color: Black

Dimensions: 70 mm (2.76 inches)

Material: ABS + 3M Adhesive

Package Contents

3x Suction Cup Mounting Base Adhesive Discs

Sold by Grid Cool Store