Adhesive Relief Soundproof Wall Panel for Kitchen Wood 60x300 cm

3D self-adhesive wall panel with grid effect wood look, 60 cm x 3 m, thickness 2.8 mm
This self-adhesive wall covering is designed to dress an interior surface with a modern and understated embossed finish. With its dimensions of 60 cm x 3 m and its thickness of 2.8 mm, it is suitable for users looking for a practical wall decoration solution for the home, an office, a rental space, a hallway, a headboard, a living room or certain utility areas. Its 3D grid-style embossed structure helps to change the visual appearance of the wall while adding a layer of surface protection.

This type of self-adhesive wall wallpaper or self-adhesive decorative wall panel is suitable for people wishing to cover a smooth wall without major work. The product focuses on decorative and functional use: it helps limit direct contact from light greasy stains on the covered surface and provides a soft cushioning effect linked to its structure. The wood look combined with the embossed grid pattern blends easily into a contemporary, minimalist interior or one inspired by a natural style.

Technical specifications

• Product type: self-adhesive wall covering / 3D wall sticker / decorative wall panel
• Visual style: modern, simple, embossed grid effect, wood look
• Dimensions: 60 cm x 3 m
• Thickness: 2.8 mm
• Format: roll or long strip to be cut according to the area to be covered
• Installation: self-adhesive
• Stated functions: wall decoration, surface protection, light cushioning effect, helps limit greasy splashes on the covered area, contribution to supplementary sound reduction
• Area of use: interior wall surfaces

Compatibility and accessories

This wall covering is mainly suitable for clean, dry, flat and relatively smooth surfaces. It can be used on painted walls in good condition, smooth panels, clean partitions, flat surfaces of fixed furniture or other comparable interior substrates, subject to good adhesion. It is intended for private individuals, interior decorators, tenants wishing to improve the appearance of a room, as well as users looking for a wood-effect self-adhesive wall covering for a simple visual renovation.

• Can be cut to fit different dimensions
• Compatible with installation on a wall section, decorative dado, furniture backing or interior decorative area
• As no confirmed accessories are specified, it is advisable to provide a tape measure, a ruler, a craft knife or scissors, as well as a soft squeegee or a dry cloth to make application easier

Installation

1. Measure the surface to be covered accurately.
2. Clean the substrate to remove dust, moisture, grease and residue.
3. Check that the wall is dry, stable and smooth.
4. Cut the self-adhesive panel to the required dimensions.
5. Gradually remove the protective film from the adhesive.
6. Apply from top to bottom or from one side to the other, pressing regularly to limit air bubbles.
7. Smooth the surface gently to improve adhesion, especially around the edges.

For a cleaner result, it is recommended to carry out a test on a small area and to avoid installation on a crumbly, damp, dusty or uneven substrate, or one with flaking paint. Proper wall preparation helps the 3D self-adhesive wall covering stay in place.

Use

This product is suitable for decorative indoor use in different rooms depending on the condition of the substrate. It can be used to visually refresh a wall, create a decorative panel, cover an area behind furniture, or add a textured effect in a living space. Its surface with the stated oil-resistant function may be suitable for spaces where light splashes may occur, subject to regular maintenance. The embossed structure and 2.8 mm thickness also provide a softer feel to the touch than a standard thin wall covering.

Other information

This wood-effect self-adhesive wall panel belongs to the category of interior decoration and light wall protection solutions. It does not replace a professional acoustic insulation material or a structural protection system. Exact performance may vary depending on the substrate, installation method and environment of use. To keep it looking clean, gentle cleaning with a non-abrasive cloth is recommended. Avoid overly aggressive products if compatibility has not been checked beforehand.

Thanks to its long 3-metre format, this self-adhesive 3D wall sticker can cover a large area with fewer joins than a small panel. Its modern embossed checked design and wood look make it a decorative solution suitable for users who want a neat, discreet and functional visual finish for interior design.